Accessory List
MS41-60xx Series
176
© Copyright 2006 TAC. All Rights Reserved. F-27382-1
Specifications
Accessories
Inputs
Control signal
MS41-60x3: Proportional, 0 to 10 Vdc; input resistance 100KΩ. Control signal adjustment available
with MS41-60x3-522 and MS41-60x3-522. Start point (offset): 0 and 50 Vdc (factory setting = 0 Vdc)
Span 2 to 30 Vdc.
Power
24 Vac, +20%-15%, rated Class 2, Class III per EN60730.
MS41-6083: 24 Vac +20%/-10% at 90 to 130°F (32 to 55°C) ambient. Half wave device.
Connections 3 ft. (0.9 m) long, 18 AWG leads, plenum-rated.
Outputs
Electrical
Output voltage: 0 to 10 Vdc.
Maximum output current: 1 mA.
MS41-60xx-502 auxiliary switch contact rating:
AC Rating: 24 Vac, 4A Resistive, 2A Inductive.
DC Rating: 12 to 30 Vdc, DC 2A.
Switching hysteresis: 2°.
Switch range: Switch A: 0 to 90° range in 5° intervals; Recommended range usage: 0 to 45°; Factory
setting: 5°. Switch B: 0 to 90° range in 5° intervals; Recommended range usage: 45 to 90°; Factory
setting: 85°.
Timing: See Model Chart.
Mechanical
Output torque rating: MS41-6043, 35 lb-in. (4 N-m); MS41-6083, 70 lb-in. (8 N-m).
Stroke: Normal angle of rotation is 90°, limited to a maximum of 95°. Field adjustable to limit travel on
either end of stroke. MS41-60x3-52x have adjustable start point and span.
Position indicator: Adjustable pointer is provided for position indication.
Environment
Ambient temperature limits
Shipping and Storage: -40 to 158°F (-40 to 70°C).
Operating: -25 to 130°F (-32 to 55°C).
Humidity 5 to 95% RH, non-condensing.
Locations NEMA 2, IP54 to EN60529.
Dimensions 5-7/16 H x 2-3/4 W x 2-3/8 D in. (138 x 70 x 60 mm ).
Agency Listings
UL UL-873, Underwriters Laboratories.
European Community EMC Directive (89/336/EEC). Emissions (EN50081-1). Immunity (EN50082-2).
CUL Canadian Standards C22.2 No. 24-93.
General Instructions Refer to F-27214.
Model No. Description
AM-726 Rotary to linear bracket.
AM-727 Rotary to linear crank arm adaptor.
AM-728 Conduit adaptor.
AM-729 3/8 in. shaft adapter.
AV-603 1/2 to 2 in. Vx-7xxx valve linkage.










