Accessory List

MPR-5600 Series
F-27382-1 © Copyright 2006 TAC. All Rights Reserved. 159
Proportional Actuators
Model Chart
These actuators provide electronic proportional
control of dampers and valves requiring return to
normal position upon power interruption. They are
compatible with controllers generating 4 to 20 mA
input signals.
Features:
• Spring return.
• 24, 120, and 240 Vac models available.
• Damper models with linkage or base models requiring
separate damper or valve linkage available.
• Die cast lower housing with 1/2 in. conduit opening and
painted steel upper housing.
• Hydraulic actuator with oil-immersed motor, transducer,
and pump.
• Proportional actuators controlled by a variable mAdc input
signal.
•82.5Ω input impedance.
• Adjustable actuator startpoint.
Valve (Basic) Actuators.
Model No.
a
a
These MPR-5x1x series valve actuators are compatible with VB-7xxx 1/2 to 2 in. valve bodies.
Actuator Power Input
Timing in Seconds
@ 72°F (22°C)
Required Linkages
Input Signal
AC Voltage
(±10%)
50/60 Hz No Load Stroke Retract
on
Power
Loss
Valve
Applications
Damper
Applications
b
b
The MPR-5x1x series actuators are basic models which may be equipped for damper applications with the installation of an AM-601 linkage.
Watts VA Extend Retract
MPR-5610 120
10 18 60 30 15
AV-600
AV-601
c
c
May be required for steam and hot water. Refer to General Instructions.
AM-601
Compatible
with
4to20mA
MPR-5611 240
MPR-5613 24
Damper Actuators.
Model No.
a
a
Damper models (MPR-5x3x) provided with factory-installed damper linkages. Only base models (MPR-5x1x) require separately ordered linkages.
Actuator Power Input
Timing in Seconds
@ 72°F (22°C)
Input Signal
AC Voltage (+10/-15%)
50/60 Hz No Load Stroke
Retract on
Power Loss
Watts VA Extend Retract
MPR-5630 120
10 18 60 30 15
Compatible with
4 to 20 mA
MPR-5633 24
PR
-
5600
r
ies
MPR-561x Series
Valve Actuator
MPR-5x3x Series
Dam
p
er Actuator