Accessory List

MP-9xxx Series
156
© Copyright 2006 TAC. All Rights Reserved. F-27382-1
Specifications
Figure 1 Adjustable Auxiliary Switch SPDT Rating Amps.
Actuator Drive Compatability
Actuators
Actuator Drives Input Type
Vdc Vdc
mA Vdc/mA mA/Vdc
Actuator Model
CP-8301-xxx
a
a
May require close nipple conduit extensions for mounting x-6680.
CP-8391-456
a
CP-8391-716
a
CP-9301 CP-9302
MP-9610 — X X — —
MP-9713 X — — X X
MP-9750 XXXXX
MP-9810 — X X — —
MP-9830 — X X — —
MP-9910 — X X — —
Control circuit
Requires SPDT switch with neutral (floating) or two-position and proportional. Refer to Figure 1 for
ratings.
Shaft rotation Reversible proportional can stop at any point in the stroke.
Specifications (Continued)
Auxiliary switch
Adjustable SPDT snap-acting. Factory set to close one contact and open the other at end of CW
stroke. Refer to Figure 1.
Environment
Ambient temperature limits
Shipping: -40 to 130°F (-40 to 54°C).
Operating: -40 to 130°F (-40 to 54°C).
Humidity 5 to 95% RH.
Locations NEMA Type 1 (NEMA 4 with AM-369).
Connections Coded screw terminals.
Case Die cast aluminum with two 1/2 in. conduit knockouts on each side.
Mounting
Dampers Upright preferred.
Valves Upright with actuator above the center line of the valve body.
Dimensions 9-9/16 H x 9-1/2 W x 10-1/2 D in. (243 x 241 x 267 mm).
Agency Listing MP-9713 and MP-9750 only: UL Listed.
General Instructions Refer to F-11331.
Cam Action
Factory Settings
C
W
CCW
61
5
Terminal
Identification
Type 120V 240V
Running 5.8 2.9
Locked Rotor 34.8 17.4
Non-inductive 12 6