Accessory List

MP-55xx Series

154

Accessories

Typical Applications

Figure 1 Typical Control Wiring for Up to Six MP-5500 Series Actuators to Controllers That Do Not Require 20 Vdc

Power from the Actuator.

Model No. Description

Damper only

AM-111 Crank arm for 5/16 in. diameter damper shaft.

AM-112 Crank arm for 3/8 in. diameter damper shaft.

AM-113 Crank arm for 1/2 in. diameter damper shaft.

AM-115 Crank arm for 7/16 in. diameter damper shaft.

AM-122 Linkage connector straight type.

AM-123 Damper clip.

AM-125 5/16 in. diameter x 20 in. damper rod.

AM-125-048 5/16 in. diameter x 48 in. damper rod.

AM-132 Ball joint connector.

AM-161-3 Damper linkage kit.

AM-601 Device includes mounting bracket, damper linkage with spring, and AM-122 straight connector. Required to

modify actuators into 2 in. (50.8 mm) stroke damper actuators.

Valve only

AV-600 Valve linkage 1/2 to 2 in. VB-7xxx and discontinued VB-9xxx valves.

AV-601 Valve linkage extension for hot water and steam applications. Use with AV-7600.

AV-7600-1 Valve linkage for VB-7XXX.

TOOLS (factory available)

TOOL-12 Wrench for adjustment of auxiliary switch.

TOOL-19 Spring compression tool for AV-600.

TOOL-37 1-5/8 in. open end wrench.

TOOL-202 Manual positioner.

24 Vac Black/Blue

120 Vac White

240 Vac White/Black

Optional multiple wired

connectors