Accessory List

MP-3xx Series, MP-4xx Series, MP-2xxx Series, and MP-4xxx Series
F-27382-1 © Copyright 2006 TAC. All Rights Reserved. 139
MP-2xxx Series.
Model No. Application
Solid
State
Drive
CP-9301
CP-9302
Power Requirements Output Shaft
Aux.
Switch
Built-in
Transformer
a
a
Units with a “-2” suffix, e.g. MP-xxxx-xxx-2-x, include a built-in transformer (used for Microtherm or with AE-504) with secondary loads wired externally
to terminals seven and eight of the actuator. Red (24 Vac) to terminal eight and Blue (12 Vac) to terminal seven. When these actuators are used with
controllers other than Microtherm or AE-504, disconnect the Red and Blue leads and tape off. Note: Models prior to “-2” suffix had transformer wired
directly to potentiometer. To disconnect the transformer, remove the back plate of the actuator, disconnect, and tape the transformer leads.
Volts Hz Amps
Torque
lb.-in.
(N-m)
Timing
Seconds
(No Load)
Degrees of
Rotation
Spring
Return
MP-2113-500
Proportional Available
24
60
2.2
50 (5.6)
25
180 (non-
Adj.)
No SPDT
⎯
MP-2130-500
120 0.5
90 (non-
Adj.)
Yes
MP-2150-500
180 (non-
Adj.)
MP-2151-500 240 0.22 30
MP-4xxx Series.
Model No. Application
Solid
State
Drive
CP-9301
CP-9302
Power Requirements Output Shaft
Aux.
Switch
Built-in
Transformer
a
a
Units with a “-2” suffix, e.g. MP-xxxx-xxx-2-x, include a built-in transformer (used for Microtherm or with AE-504) with secondary loads wired externally to
terminals seven and eight of the actuator. Red (24 Vac) to terminal eight and Blue (12 Vac) to terminal seven. When these actuators are used with con-
trollers other than Microtherm or AE-504, disconnect the Red and Blue leads and tape off. Note: Models prior to “-2” suffix had transformer wired directly
to potentiometer. To disconnect the transformer, remove the back plate of the actuator, disconnect, and tape the transformer leads.
Volts Hz Amps
Torque
lb.-in.
(N-m)
Timing
Seconds
(No Load)
Degrees of
Rotation
Spring
Return
MP5-4651 Proportional Available
240
50
0.25
50 (5.6)
108 180 (Adj.
b
)
b
Rotation adjustable 45 to 320°. Caution: On actuators with proportional input signals changing the rotation will affect the control, since the internal feedback
potentiometer’s travel is fixed.
CW SPDT
Yes
MP-4701 Five position — 60 90
180 (non-
Adj.)
CCW
None
MP5-4751
Proportional Available
50 108
SPDTMP-4851 60
220
(24.9)
130
180 (Adj.
b
)No
MP5-4851 50 156
Part Numbers for Hazardous Locations Applications.
Hazardous Locations
a
a
Class 1, Groups C and D, and Class 2, Groups E, F, and G Hazardous Locations; Ref. EN-56-2.
Hz
Listing
MP6-4xx 60
UL Listed and CSA Certified
MP7-3xx, MP7-4xx 50