Accessory List

MF4E-60x3x Series
F-27382-1 © Copyright 2006 TAC. All Rights Reserved. 121
Specifications
Accessories
Inputs
Control signal Floating control, 24 Vac +20%/-15%.
Power Input See Model Chart. All 24 Vac curcuits are Class 2.
Electrical Connections 10 ft plenum rated cable.
Outputs
Mechanical
Stroke: 95
o
± 3
o
of rotation. Stroke limit is adjustable 0
o
to 95
o
in both clockwise (CW) and
counterclockwise (CCW) directions.
Manual Override: Allows free shaft rotation to any position from 0
o
to 95
o
.
Mounting: Mounts directly onto a 1/2 in. (13 mm) round shaft. Two mounting screws allows mounting
onto the shaft in any position. Minimum 2 in. (51 mm) shaft length required. Mounting onto a 3/8 in. (9.5
mm) diameter shaft requires an AM-135 adapter kit.
Actuator Timing for 90
o
Stroke: See Model Chart.
Torque Ratings: See Model Chart.
Position Indicator: Visual indicator.
Nominal Damper Area: Actuator sizing should be done in accordance with the damper manufacturer’s
recommenations for the given flow condition.
Direction of Rotation: Clockwise (CW) or counterclockwise (CCW) rotation.
Environment
Ambient temperature limits
Shipping and Storage: -40 to 160°F (-40 to 71°C).
Operating: -22 to 140°F (-30 to 60°C).
Humidity 5 to 95% RH, non-condensing.
Locations NEMA 1 (IEC IP30).
Dimensions 4-5/32 L x 3-17/32 W x 2-3/4 D in. (110 x 90 x 70 mm).
Agency Listings
UL 873
Underwriters Laboratories (File # E9429) Category Temperature-Indicating and Regulating Equipment.
Plenum rated.
CUL UL Listed for use in Canada by Underwriters Laboratories. Canadian Standards C22.2 No. 24-93.
European Community EN 61326.
Australia This product meets requirements to bear the C-Tick Mark.
General Instructions Refer to F-27108.
Model No. Description
AM-135 3/8 in. (9.5 mm) shaft adapter.
AM-675 Base mounting plate (used with AM-714).
AM-714 Weather shield.
AM-769 Terminal cover guard.