Accessory List

MF4D-x033 Series
118
© Copyright 2006 TAC. All Rights Reserved. F-27382-1
Accessories
Typical Applications
See notes on next page.
Specifications (Continued)
Environment
Ambient temperature limits
Shipping and Storage: -40 to 160°F (-40 to 71°C).
Operating: -22 to 140°F (-30 to 60°C).
Humidity 15 to 95% RH, non-condensing.
Locations
NEMA 1, NEMA 2, UL Type 2 (IEC IP54) with customer supplied water tight conduit connectors.
Enclosure is air plenum rated.
Agency Listings
UL 873 Underwriters Laboratories (File #E9429 Category Temperature-Indicating and Regulating Equipment).
CUL UL Listed for use in Canada by Underwriters Laboratories. Canadian Standards C22.2 No. 24-93.
European Community
EMC Directive (89/336/EEC). Low Voltage Directive (72/23/EEC). This product fits in Installation
Category (Overvoltage Category) II per EN 61010-1.
Australia
This product meets requirements to bear the C-Tick Mark according to the terms specified by the
Communications Authority under the Radiocommunications Act 1992.
General Instructions Refer to F-27170.
Model No. Description
AM-714 Weathershield Kit.
AM-756 Metric conduit adapterM20 x 1.5 to 1/2 in. NPT.
AM-771 Crank arm and bracket kit.
AM-772 Bracket for reverse mounting.
MF4D-x033-x00
24 Vac Transformer
or 20 to 30 Vdc
Red
Black
Common
1
Hot (+DC)
Line
Volts
Blue
Drive CW
Drive CCWYellow/Black
2
Typical
Floating
Controller
Violet
5
Feedback Signal
2 to 10 Vdc
(-)
(+)
6
Figure 1 Floating Point Control.
MF4D-x033-x00
24 Vac Transformer
or 20 to 30 Vdc
Red
Black
Common
Hot (+DC)
1
Line
Volts
Controller
Blue
Yellow/Black
Hot
Common
Drive CW
Drive CCW
Violet
5
Feedback Signal
2 to 10 Vdc
(-)
(+)
2
6
Figure 2 Triac Source.