User Manual

IMPORTANT INFORMATION - PLEASE READ BEFORE SETTING UP YOUR TABLET

The tablet must be set up by an adult to ensure the safety of all users of the device.

First Setup:

When you remove the tablet from the box, we recommend charging it for 3 hours to provide

enough charge for set up and use.

The battery icon can be found in the top left of the screen.

Please remove protective ﬁlm from screen before starting.

Press and hold the ON/OFF button for 5 seconds to turn on the tablet.

Language Settings:

Upon starting the tablet, you’ll be greeted with a language selection screen.

Select your language and press ‘Next’ to continue. The language can be changed later in the

system section inside the parent account.

Wi-Fi connection:

Select your Wi-Fi connection, enter your password and then press connect. Once connected to

the internet, the tablet will then automatically update to the latest software version if necessary.

Be aware that the tablet can only connect to secured networks in order to protect your child.

Please connect your tablet to Wi-Fi on a regular basis to ensure that you receive and enjoy the

latest updates available. For the ﬁrst Set Up a Wi-Fi connection is necessary.

Parent Account PIN:

On the account screen, you’ll be asked to set up a 4-digit pin. Please enter your pin and press

‘Next’. Conﬁrm your chosen pin by inputting again.

!!! PLEASE MAKE A NOTE OF THIS PIN !!!

In the case of a lost pin, the device can be reset by pressing the ‘Reset Pin’ Button before ent

ering the parent account. A reset link will be sent to your later chosen e-mail address and must

be conﬁrmed.

Please read the privacy policy thoroughly. Press ‘Accept’ to continue.

Please read the terms of service thoroughly. Press ‘Next’ to continue.

Activating your device:

You will be prompted to enter an e-mail address to activate your device. Please enter your e-

mail address, tick the checkbox to agree to the terms of service. Press ‘Next’.

Please re-enter your e-mail address to conﬁrm the address is correct. Press ‘Next’.

An activation link will be sent to your chosen e-mail address, please click on the link in the e-mail

to activate your device. A hold screen will be displayed until your e-mail is conﬁrmed via the link.

Afterwards an activation conﬁrmation will appear. Press ‚Next‘ to continue.

Setting up child’s proﬁle:

Please enter the name of your child. Turn the parental controls for the device on or off by

pressing the ‘ON/OFF’ checkbox and customize it by pressing ‚Customize‘. Press ‚Finish‘ to end

the setup.

Finish the setup by pressing the ‘Finish’ button.