AIASHVillETM 400 f WARNING: TO PREVENT ELECTRICAL SHOCK OR FIRE HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. BEFORE USING THIS APPLIANCE, READ THE OPERATING GUIDE FOR FURTHER WARNINGS.
NASHVILLE’” 400 GENERAL DESCRIPTION Congratulations, you have just purchased the successor of the famous LTD@ 400. The new Nashville’” 400 is a refinement of the capabilities and features of the older LTD@ 400 and has far surpassed that unit in performance. This new system features our more efficient Super Structure’“, 15” Black Widow@ loudspeaker in a ruggedly constructed enclosure of 3/4” wood, which is covered with 34-ounce heavyduty vinyl Tolex.
EQUALIZATION LOW EQ CONTROL (8) The Low EQ Control is of the active”shelving type”and provides lowfreqency boost in the clockwise positions and low frequency cut in the counterclockwise positions. Flat response is obtained in the vertical 12:00 o’clock position, as indicated by the zero in the center of the rotation. The action of this control is more or less conventional and no operational problems should be encountered.
PILOT LED (12) This light emitting diode (LED) indicates when the amp is switched on and actually drawing from the line (mains) connection. It is totally solid-state and not subject to burnouts, as are incandescent types. POLARITY SWITCH (13) This switch is a three position type with the center, zero position, completely removing the internal grounding capacitor from the circuit.
NASHVILLE’” 400 SPECS POWER SECTION: PATCH INPUT: POWER AMPLIFIER SECTION: THE FOLLOWING SPECS ARE MEASURED @ 1 KHz Function: Low Level Pre-EQ Effects/Pedal Return ImpedanceL High Z, 220K ohms WITH THE CONTROLS PRESET AS FOLLOWS: RATED POWER & LOAD: Designed Input Level: -14 dBV, 0.
OR b Shop the defectrve item, prepard, to: PEAVEY ELECTRONICS CORPORATION international Service Center Highway 80 East MERIDIAN. MS 39301 including therewith a complete, detailed descnption of the problem, together with a legible copy of the original PROOF OF PURCHASE and a complete return address.
