User Manual

7
Channel Strip for Channel 8
21
22
USB MEDIA JACK (CH. 8)
A-type USB connector that a removable data storage device can be connected to playback music
USB Playback:
First, select the proper input for channel 8 by sliding the input selection switch (23) to the
USB position. e bottom of the LCD display will say “Insert USB drive”.
Insert your USB drive into the USB Media Jack (21) at the top of channel 8. e Media Player
will now enter "Folder Navigation Mode". In this mode, you can scroll through a list of all
folders on the USB drive. Once you select a folder, the Media Player will enter "Song Navigation
Mode" which allows you to scroll through a list of all songs contained in the selected folder. If
there are no songs in the selected folder, the LCD will display "No Songs". To return to Folder
Navigation Mode, scroll to the very beginning of the list and select the <FOLDERS> option.
Once a song is nished playing, the Media Player will automatically start playing the next song.
Once the Media Player reaches the last song, it will automatically loop back to the beginning of
the list.
BLUETOOTH ACTIVE LED (CH 8)
e blue “Bluetooth Active LED” indicates the status of the Bluetooth connection. If the LED
is o, the Bluetooth module is powered o. If the LED is slowly ashing, the XRs is not paired
with any device, but is available for connection.. When the LED is lit solid, the source device is
properly paired to the mixer and ready to play.
Bluetooth Operation:
To listen to music via the Bluetooth wireless connection, you must rst pair (link) your XRs
mixer with your Bluetooth phone and/or music device.
Turn o any Bluetooth devices previously paired with the XRs mixer.
Turn on the Bluetooth feature on your phone or music device.
Make sure the XRs is ready for a Bluetooth connection.
e Bluetooth Active LED should be blinking and the LCD will say, “Bluetooth Input”.
Place your phone or music device in Bluetooth search mode. e phone or music device will
begin searching for the XRs.
Select “Peavey Mixer” from the search results on your phone or music device.
You will be prompted to enter a pin number. Enter the pin#, it is 7878.
If the pairing is successful, the Bluetooth Active LED will stop blinking and stay lit.
You are now ready to begin streaming through Bluetooth to the mixer. e level can be adjusted
from the connected source or by the level control in Channel 8.
e XRs mixer will remember up to 10 devices that it was previously paired with and will automat-
ically connect to the last device with which it was paired when turned on. To clear the paired device
memory, make sure the mixer is in Bluetooth mode and press and hold the Previous button (35),
Play/Pause button (36), and Next button (37) for 5 seconds. e XRs mixer will ask if you would
like to clear the Bluetooth memory. Select "Y" using the Media Select knob to clear the memory.
e XRs mixer will go through the process of clearing the memory, which should take approxi-
mately 15 seconds.
23
24
25
26
27
30
28
22
21
29
HIGH
HIGH
MID-MORPHLOW
LOW
MONITOR
MONITOR MID
EFFECTS
LEVEL
1
CH. 1
min max
min max
min max
clip
sig
min max
high
min max
LEVEL
2
CH. 2
min max
min max
min max
clip
sig
min max
high
min max
LEVEL
3
CH. 3
min max
min max
min max
clip
sig
min max
high
min max
LEVEL
4
CH. 4
min max
min max
min max
clip
sig
min max
high
min max
LEVEL
5
CH. 5
min max
min max
min max
clip
sig
min max
high
min max
LEVEL
6
CH. 6
min max
min max
min max
clip
sig
min max
high
min max
LEVEL
7
CH. 7
min max
min max
min max
clip
sig
min max
high
min max
LEVEL
LEVEL LEVEL LEVEL
8
CH. 8
min max
min max
clip
sig
min max
min max
min max
USB MEDIA PLAYBACK
DIGITAL EFFECTS
Press to Select
Press to Select
EFX
SELECT
MEDIA
SELECT
MIC
EFX
MUTE
DEFEAT
efx clip
IN
USB
USB MEDIA
+12
+6
0
-6
-12
63 125 250 500 1K 2K 4K 8K 12K
FLS FEEDBACK LOCATING SYSTEM
SIGNAL
MONITOR
+12
+6
0
-6
-12
63 125 250 500 1K 2K 4K 8K 12K
FLS FEEDBACK LOCATING SYSTEM
SIGNAL
MAIN
KOSMOS-C MONITOR MAIN
min max
min/o max
min max
EFX TO MON
-6
-12
LIMIT
-18
-24
-30
-6
-12
LIMIT
-18
-24
-30