User Manual

10
40
41
42
43
44
45
46
Front Panel
HIGH
HIGH MID-MORPHLOW
LOW
MONITOR
MONITOR MID
EFFECTS
LEVEL
1
CH. 1
min max
min max
min max
clip
sig
min max
high
min max
LEVEL
2
CH. 2
min max
min max
min max
clip
sig
min max
high
min max
LEVEL
3
CH. 3
min max
min max
min max
clip
sig
min max
high
min max
LEVEL
4
CH. 4
min max
min max
min max
clip
sig
min max
high
min max
LEVEL
5
CH. 5
min max
min max
min max
clip
sig
min max
high
min max
LEVEL
6
CH. 6
min max
min max
min max
clip
sig
min max
high
min max
LEVEL
7
CH. 7
min max
min max
min max
clip
sig
min max
high
min max
LEVEL LEVEL LEVEL LEVEL
8
CH. 8
min max
min max
clip
sig
min max
min max
min max
USB MEDIA PLAYBACK
DIGITAL EFFECTS
Press to Select
Press to Select
EFX
SELECT
MEDIA
SELECT
MIC
EFX
MUTE
DEFEAT
efx clip
IN
USB
USB MEDIA
+12
+6
0
-6
-12
63 125 250 500 1K 2K 4K 8K 12K
FLS FEEDBACK LOCATING SYSTEM
SIGNAL
MONITOR
+12
+6
0
-6
-12
63 125 250 500 1K 2K 4K 8K 12K
FLS FEEDBACK LOCATING SYSTEM
SIGNAL
MAIN
KOSMOS-C MONITOR MAIN
min max
min/o max
min max
EFX TO MON
-6
-12
LIMIT
-18
-24
-30
-6
-12
LIMIT
-18
-24
-30
41 42
43 44 45 46
40
FLS
When feedback occurs, the corresponding LED of the frequency that is closest to the frequency that is feeding back will illuminate over the
slider to be adjusted. Slowly bring the corresponding slider down until feedback is gone. e LED will remain illuminated for a few seconds
aer the feedback is gone. If the feedback doesn’t return, all of the LEDs will become active again, acting as a normal EQ.
GRAPHIC EQ
ese nine-band Equalizers are designed to either be used to reduce feedback or to adjust the overall frequency response of the signal being
sent to the ampliers. Subtle adjustments made with the graphic equalizer can improve the way your loudspeaker system sounds in the room.
You should be aware however, that setting large amounts of boost or arbitrary curves can reduce amplier headroom, leading to early distor-
tion or just plain bad or unintelligible sound. Working with the FLS, the graphic EQ can also be used to reduce feedback. Each band of EQ can
supply up to 12dB of boost or cut.
LEVEL LED LADDER
ese LEDs indicate the signal level of the main mix and the monitor mix. e top LED indicates LIMIT and activation of our revolutionary
DDT speaker protection circuit. Peavey’s award winning speaker protection is built into the XRs powered mixer and is activated automatically
to maximize the power amplier without fear of distortion.
KOSMOS-C
e Kosmos-C uses special circuitry to enrich the sound of your system. is is not just a simple bass boost. It provides “natural bass enhance-
ment” by adding harmonically related bass signals that track the envelope of the original signal. e amount of eect is greatly inuenced by
the source material and some experimenting may be necessary to get the best results.
EFX TO MON
is switch toggles the EFX return signal being sent to the monitors. When it is lit, the eects signal is being sent to the monitors.
MONITOR LEVEL
e Monitor level control adjusts the level of the signal coming out of the Monitor send ¼” jack (15b). It can also be assigned to feed the 2nd
power amplier via the selector switch (20) on top of the mixer.
MAIN LEVEL
e Main level control sets the level of the main mix and the overall volume of the powered mixer.