User Manual

ManualsBrandsPeavey Electronics ManualsMixersAudio mixer power amplifier

USB PLAYBACK:

First, make sure channel 9 is in

USB playback mode by checking

the status of the Ch 9 INPUT button

(37). When the switch is dark,

channel 9 is in USB playback mode.

If it is blinking or solid blue, it is in

Bluetooth mode. The bottom of the

LCD display will say “Insert USB

Drive” when in USB playback mode.

Insert your USB drive in the USB

Media Jack (17) at the top of

channel 9. The mixer will now go

into folder navigation mode.

In folder navigation mode, you can

navigate through all of the folders

present in the USB drive. The

first folder in the list will always

be “<ROOT>”. This is the root

directory of the USB drive and will

contain any songs that are not in

a specific folder. To navigate, use

the “Media Select” encoder (36).

To select a folder, press the “Media

Select” encoder. Once you select

a folder, the mixer will enter song

navigation mode and will display all

of the playable songs in that folder.

In song navigation mode, you

can select a song by turning and

pressing the “Media Select”

encoder or by pressing the “Next”

and “Previous” switches. If you

were currently playing a song and

selected a new song, the mixer

will automatically start playing the

new song. If you were paused or

stopped, the mixer will select the

new song and remain stopped.

To fast forward a song, press and

hold the “Next” switch, and to

rewind a song, press and hold the

“Previous” switch.

To go back to folder navigation

mode, scroll all the way to the left

and there will be an option called

“<FOLDERS>”. Selecting this

item will enter folder navigation

mode, where you can select

another folder of songs.

If a folder is selected that has no

playable songs, “No Songs” will be

displayed on the LCD. Scroll to the

left and select “<FOLDERS>” to

go back to folder navigation mode

and select another folder.

MASTER CONTROLS

FLS

When feedback occurs, the

corresponding LED of the frequency

that is closest to the frequency that

is feeding back will illuminate the

slider to be adjusted. Slowly bring

the corresponding slider down

until feedback is gone. The LED

will remain illuminated for a few

seconds after the feedback is gone.

If the feedback doesn’t return, all

of the LEDs will become active

again.

GRAPHIC EQ

These nine-band Equalizers are

designed to either be used to

reduce feedback or to adjust the

overall frequency response of the

signal being sent to the amplifiers.

Subtle adjustments made with

the graphic equalizer can improve

the way your loudspeaker

system sounds in the room. You

should be aware however, that

setting large amounts of boost

or arbitrary curves can reduce

amplifier headroom, leading to

early distortion or just plain bad or

unintelligible sound. Working with

the FLS, the graphic EQ can also

be used to reduce feedback. Each

band of EQ can supply up to 12dB

of boost or cut.

LEVEL LED LADDER

These LEDs indicate the signal level

of the main mix and the monitor

mix. The top LED indicates LIMIT

and activation of our revolutionary

DDT speaker protection circuit.

Peavey’s award winning speaker

protection is built into the XR-AT

powered mixer and is activated

automatically to maximize the

power amplifier without fear of

distortion.

MAIN LEVEL

The Main level control sets the

level of the main mix and the

overall volume of the powered

mixer.

MONITOR LEVEL

The Monitor level control adjusts

the level of the signal coming out

of the Monitor send 1/4" jack (41).

It can also be assigned to feed

the 2nd power amplifier via the

selector switch (24).

Master Controls

comp

Auto-Tune

HIGHMID-MORPHLOW

LOW MID HIGH

MONITOREFFECTS COMPRESSOR

CH. 1

LEVEL

min max

comp

Auto-Tune

CH. 2

min max

high

min max

clip

sig

clip

sig

comp

Auto-Tune

CH. 3

min max

high

min max

clip

sig

comp

CH. 4

min max

high

min max

clip

sig

comp

CH. 5

min max

high

min max

clip

sig

comp

CH. 6

min max

high

min max

clip

sig

comp

CH. 7

min max

high

min max

clip

sig

CH. 8

min max

clip

sig

CH. 9

min max

clip

sig

LEVEL

MAIN

min max

+12

-6

-12

63 125 250 500 1K 2K 4K 8K 12K

FLS FEEDBACK LOCATING SYSTEM

min max

high

LEVEL

MONITOR

min max

+12

-6

-12

63 125 250 500 1K 2K 4K 8K 12K

FLS FEEDBACK LOCATING SYSTEM

SIGNAL

MON

MAIN

POWER AMP2 ASSIGN

EFX TO MON

Enable

KOSMOS-C

min max

USB

MIC

LOW

HIGH

EFX

Edit

Auto-

Tune

Press to Select

efx clip

EFX / AUTO-TUNE

MEDIA SELECT

CH 9 INPUT

USB MEDIA PLAYBACK

DIGITAL EFFECTS

MUTE DEFEAT

ANALOG

MEDIA

CHANNEL

DIGITAL

MEDIA

CHANNEL

USB MEDIA

-6

-12

LIMIT

-18

-24

-30

SIGNAL

-6

-12

LIMIT

-18

-24

-30

Auto-Tune

3430

282726