XR®-AT Powered Mixer Operating Manual www.peavey.
FCC/ICES Compliancy Statement FCC Compliancy Statement This device complies with Part 15 of the FCC rules and Industry Canada license‐exempt RSS Standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must This complies with Part 15 ofcause the FCC rules.operation.
ENGLISH XR - AT ® Powered Mixer Congratulations on the purchase of your new XR® -AT powered mixer from Peavey®. The Peavey XR-AT is a revolutionary all-in-one powered mixer that provides everything a musician or DJ needs, including up to eight combination XLR and 1/4" inputs using Peavey’s award winning mic preamps and dual 500 Watt amplifiers for crystal clear audio reproduction. Plus, for the first time ever, the XR-AT mixer includes Antares® Auto-Tune® pitch correction technology.
Channel Controls 5 Auto-Tune Auto-Tune CH. 1 comp COMPRESSOR 6 CH. 2 min Auto-Tune CH. 3 CH. 4 comp min max comp max min CH. 5 comp max min CH. 6 comp max min CH. 7 comp max min CH. 8 CH. 9 USB MEDIA KOSMOS-C comp max min ANALOG MEDIA CHANNEL max DIGITAL RCAMEDIA CHANNEL ENABLE 3.
Channel Controls Auto-Tune CH. 1 Auto-Tune CH. 2 CH. 3 comp CH. 5 comp CH. 6 comp CH. 7 comp 17 CH. 8 CH. 9 ANALOG MEDIA CHANNEL DIGITAL MEDIA CHANNEL USB MEDIA KOSMOS-C comp COMPRESSOR comp CH.
Master Controls USB PLAYBACK: First, sure 9 6is in CH. 7 CH. make 4 CH. 5channelCH. USB playback mode by checking the status of the Ch 9 INPUT button (37). When the switch is dark, channel 9 is in USB playback mode. If it is blinking or solid blue, it is in Bluetooth mode. The bottom of the LCD display will say “Insert USB Drive” when in USB playback mode. Insert your USB drive in the USB Media Jack (17) at the top of channel 9. The mixer will now go into folder navigation mode.
Master Controls 23 Auto-Tune EFX Auto-Tune CH. 3 comp TO MON This toggles the CH. EFX6 returnCH. 7 CH.switch 4 CH. 5 signal being sent to the monitors. When it is lit, the effects signal is being sent to the monitors. comp max min comp max min comp max min comp max min max min CH. 8 CH.
Master Controls 35 Auto-Tune EDIT min min max min high 36 min Auto-Tune max max min 37 clip max min sig max max min max min max min high max min max min max max min min max min max min max min max min max clip clip min max min max clip min sig max sig DIGITAL MEDIA CHANNEL KOSMOS-C DIGITAL EFFECTS max min max min max max max min 25 HIGH MEDIA SELECT max min LOW CH 9 INPUT 32 Enable max USB MEDIA PLAYBACK 63 125 250 BLUETOOTH ACTIVE
Operating The DSP EFFECTS EDIT MODE: In EFX Edit Mode, the EFX Select knob is used to navigate through the EFX presets. Turning the knob changes the EFX preset in the display. The new selection will be blinking in the display; push the EFX Select knob to choose the new effect. Once the effect has been selected, you can now edit the effect. To do this, press the EFX Select knob and the display will change to the current parameter setting of the preset. Turn the EFX Select knob to edit the parameter.
Auto-Tune Key Table Key Display Note Number (n)= Key 0 1 2 3 4 5 6 7 8 9 10 11 Chrom C C# D D# E F F# G G# A A# B C Maj C D E F G C Mnr C D D# F G G# A# C#Maj C C# D# F F# G# A# C#Mnr C# D# E F# G# D Maj C# D E F# E D# D Mnr C D D#Maj C D A B A B G A B F G A A# F G G# A# D#Mnr C# D# F F# G# A# B E Maj E F# A B F# G A B A A# C# D#
Inputs/Outputs 41 38 3 MONITOR OUT 3.5mm RCA 42 L L 1 R 2 1 XLR-1/4” PAD PAD 2 PAD 3 PAD 4 PAD 5 PAD 6 PAD 7 ACTIVE MEDIA 4 MEDIA INPUTS GLOBAL PHANTOM POWER 43 R RECORD OUT INPUT SELECT 8 AMP 2 TRS BAL ENABLE TRS UNBAL SUB OUT TRS BAL MAIN OUT TRS BAL 39 NON-POWERED OUTPUTS AMP 1 POWER AMP IN 40 38 GLOBAL PHANTOM POWER This switch, when depressed, applies +48 VDC to all input XLR connectors to power microphones that need phantom power to work.
Rear Panel CAUTION WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, THIS APPARATUS SHOULD NOT BE EXPOSED TO RAIN OR MOISTURE AND OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHOULD NOT BE PLACED ON THIS APPARATUS. TO PREVENT THE RISK OF FIRE HAZARD, REPLACE WITH SAME TYPE 250 VOLT FUSE.
51 AUTO-TUNE FOOTSWITCH MIDI In/Footswitch This 8-pin DIN connector is provided for the connection of the Peavey 5-Button MIDI Footswitch. Preferably this should be connected before the mixer is powered up. See the “Peavey 5-Button MIDI Footswitch” section of this manual for a more detailed explanation of operation. This can also be used as a MIDI IN connection, using a standard 5-pin MIDI cable, if the mixer is going to be controlled by a separate MIDI controller other than the Peavey footswitch.
Effects (parameter) PLATE (TIME) DESCRIPTION PREDELAY ROOM ROOM SIZE FRONT END HP BACK END LP MORE DESCRIPTIVE DAMP FACTOR NAME P1 Bright 35 ms P2 Gentle LP 48 ms P3 Med LP 62 ms P4 Hard LP 78 ms P5 Dark 95 ms HALL (TIME) H1 Vox Fox 35 ms Med Med Subtle Subtle Med Hall H2 Vox Huge 42 ms Med Large Subtle Subtle Cathedral H3 Vox Glow 10 ms Med Large Subtle Subtle Auditorium H4 Strings 30 ms Med Med Subtle Subtle Concert Hall H5 Brass Hall 35 ms High M
1 2 3 4 Block Diagram XLR LINE GND COMBO PHANTOM A ON/OFF XLR LINE +48V PAD PHANTOM T 2 3 1 LO 80Hz EQ 4kHz HI 12kHz MID-MORPH 400Hz BLUETOOTH/ USB XLR-1/4" SELECT MUTE MICS MIC PRE COMP CHANNEL 8 GND R S USB INPUT BLUETOOTH INPUT STATUS CHANNEL 9 LINE COMBO LEFT RIGHT MP3 IN MIC PRE CHANNEL 1 - 7 2 3 1 T R S A ON/OFF AUTO-TUNE CH 1-3 ONLY MID HI EQ MID HI EQ PRESET FOOTSWITCH EQ LO EQ LO LEVEL B LEVEL CLIP SIGNAL EFX MONITOR SIGNAL CLIP MONIT
Specifications INPUT SENSITIVITY: Mic In to full power at the power amp. Master Volume Nom. Full Nominal -40 dBu -22 dBu Line In to full power at the power amp. Master Volume Nom. Full Nominal -10 dBu +8 dBu CHANNEL EQ: Shelving EQ Low EQ Mid-Morph Low High High EQ 80 Hz ±15 dB 250 Hz 4 kHz 12 kHz ±15 dB ±15 dB ±15 dB ±12 dB ±12 dB ±12 dB ±12 dB ±12 dB ±12 dB ±12 dB METER ARRAY: LIMIT -6 dB -12 dB -18 dB -24 dB -30 dB CLIP LED: Clip LEDs come on 3 dB before clipping.
Notes ______________________________________________________________________________________________________________________ ______________________________________________________________________________________________________________________ ______________________________________________________________________________________________________________________ ______________________________________________________________________________________________________________________ _________________
Notes ______________________________________________________________________________________________________________________ ______________________________________________________________________________________________________________________ ______________________________________________________________________________________________________________________ ______________________________________________________________________________________________________________________ _________________
U.S. CUSTOMER WARRANTY REGISTRATION Optional Product Extended Warranty Registration Give us some information and put your extended warranty into effect! Please take a few minutes to fill out this information/survey sheet to help us get to know and serve you better. To save time, submit your warranty registration online at www.peavey.com/support/warrantyregistration 1. 7.
FROM: Place Postage Here Peavey Electronics Corporation Attn: Warranty Department P.O.