PV®6 • PV®6BT Compact Mixer Operating Manual www.peavey.
FCC/ICES Compliancy Statement This device complies with Part 15 of the FCC rules and Industry Canada license-exempt RSS Standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, that may cause undesired operation. Le présent appareil est conforme aux CNR d’lndustrie Canada applicables aux appareils radio exempts de licence.
ENGLISH PV®6 and PV®6BT Compact Mixers Introducing the next level in world class non-powered mixer performance. The all new PV series mixing consoles include Peavey's reference-quality mic preamps that deliver an incredible 0.0007% THD, making the PV series mixers excellent for live or recording applications.
Front Panel: MONO MIC INPUT CHANNEL 1 2 3 4 5 6 Electric Guitar Pre-Shape Engaging this button optimizes the on board equalization for guitar. Signal Presence/Clip LED This LED helps in setting the gain control. Gain (3) should be adjusted so that the green LED flashes in time with the source, and turns red only on the loudest peaks. If adding EQ results in clipping (red LED), compensate here by reducing gain (3). The red clipping LED lights when roughly 5dB of headroom remains.
1 PV 6 BT 3/4 5/6 6 INPUT STEREO MIXER WITH DIGITAL EFFECTS AN 2 Signal Presence/Clip LED This LED helps in setting the gain control. Gain (3) should be adjusted so that the green LED flashes in time with the source, and turns red only on the loudest peaks. If adding EQ results in clipping (red LED), compensate here by reducing gain (3). The red clipping LED lights when roughly 5dB of headroom remains. 3 Gain ELECTRIC The Input Gain control is used to establish proper gain structure in the channel.
PV 6 6 INPUT STEREO MIXER PV®6 Front Panel 12 13 14 15 Two-way Audio Input Selector Allows you to select between a 1/4" and RCA audio input. Balance Adjusts relative levels of left and right channels. Level Adjusts the level of the source selected by (11). GAIN min GAIN max - GAIN max + high low - max + high min right left R PAN PAN To Control Room When depressed, USB digital audio return is routed to the control room and headphone outputs.
PV®6 Front Panel 23 EFX Level This is the master output level control for the EFX mix. The output level sent to the EFX Send jack is controlled by the Channel Level Control (10), the channel EFX Send controls (8), and by this master control. The 12:00 position is the recommended setting for this control. 24 Headphone Level This knob sets the headphone and control room output levels. To avoid damage to your hearing‚ make sure to turn the dial fully counterclockwise before using headphones.
PV 6 BT 6 INPUT STEREO MIXER WITH DIGITAL EFFECTS AND BLUETOOTH PV®6BT Front Panel 11 GAIN max min 0 GAIN max POWER 1/4” max 5/6 RCA 0 TO CONTROL ROOM -HIGH+ -HIGH+ 14 EFX Mute - + - + MID-MORPH MID-MORPH Depressing this button will cut all digital effects from the main mix. 0 0 min max min 0 low max low TO MAIN c 13 max min left max PAN right EFX SELECT Use this rotary encoder to choose which effect you want to apply. There are 9 reverbs, 4 delays, and 3 chorus effects.
PV®6BT Front Panel 22 RCA Connectors for Monitor Connect powered monitors, or an amplifier feeding monitor speakers here. Set the volume controls on the monitors A and B to be equal when the A/B switch is toggled. The signal sent to this output is normally the Left/Right mix. When the "To Control Room" switch (20) is engaged, the USB return signal is also sent to the Monitor Outputs. 23 A/B Toggle Switch When depressed, the A outputs are muted and the B outputs are on.
PV®6 Upper Panel 28 30 32 35 1/4”-Hi-Z DIGITAL STEREO L DIRECT OUT 3 L 4 R R 5 PV 6 2 R 3/4 R 6 5/6 6 INPUT STEREO MIXER 29 31 33 34 MIC/LINE INPUT This combination input jack can accept either a 1/4” (balanced or unbalanced) input or a XLR balanced, low-impedance connection. The tip is positive on the 1/4” balanced input, and pin 2 is positive on the XLR.
PV®6BT Upper Panel 30 32 34 36 1/4”-Hi-Z DIGITAL STEREO L DIRECT OUT L R L 5 L 3 MAIN OUT DIRECT OUT ON/OFF 1 2 R PV 6 BT 3/4 R 6 5/6 6 INPUT STEREO MIXER WITH DIGITAL EFFECTS AND BLUETOOTH 31 33 35 38 37 MIC/LINE INPUT This combination input jack can accept either a 1/4” (balanced or unbalanced) input or a XLR balanced, low-impedance connection. The tip is positive on the 1/4” balanced input, and pin 2 is positive on the XLR.
PV®6 and PV®6BT Rear Panel 37 38 POWER ON 28 39 DIGITAL AUDIO PORT COMPUTER DC POWER INLET Use to connect the included power supply. Be sure the power supply is connected to the PV®10 before connecting to a power source. Use 15VDC, 1A adapter only. Replace only with Peavey part number 30908119. 29 POWER SWITCH This is the main power switch. 30 USB PORT TYPE B The USB port is used to connect the PV® Series USB mixer to a computer for recording or playing back digital audio to/from your computer.
PV®6BT EFX 1 - Plate Reverb Bright 2 - Plate Reverb Medium Low-Pass 3 - Plate Reverb Dark 4 - Hall Reverb Vocal 5 - Hall Reverb Vocal Huge 6 - Hall Reverb Strings 7 - Room Reverb Vocal Air 8 - Room Reverb Snare Low 9 - Room Reverb Acoustic Guitar 10 - Delay Double 11 - Delay Slapback 12 - Delay Bright, Few Repeats 13 - Delay Bright, More Repeats 14 - Chorus High Depth, Slow Rate 15 - Chorus Moderate Depth, Wide Rate 16 - Chorus Short Depth, Fast Rate
4 3 2 BLUETOOTH INPUT USB B Streaming Return (BT Model Only) ON/OFF STATUS CHANNEL 5/6 3.
Product Specifications PV®6 & PV®6BT Series Specifications Mic pre EIN = -126 dBu @ max gain with 150 ohm source Inputs Function Microphone (150 ohms) Min** Input Levels Nominal* -71 dBu -51 dBu Min Gain (4 dB) -17 dBu +5 dBu +16 dBu Input Z Input Gain Setting 2 kΩ Max Gain (59 dB) Max Bal/ Unbal Connector -39 dBu Bal XLR Pin 1 Gnd Pin 2 (+) Pin 3 (-) Bal 1/4" TRS; Tip (+) Ring (-) Sleeve Ground Unbal 1/4" TS; Tip (+) Sleeve Ground Line (10 k ohms) 10 kΩ Max Gain (40 dB) -52 dBu
Gain Mic Input Gain Adjustment Range: +4 dB to +59 dB Mic Input to Left/Right Balance Output 79 dB (max gain) Line Input Gain Adjustment Range: -15 dB to 40 dB Line Input to Left/Right Balance Output 60 dB (max gain) Stereo 3/4 Gain Adjustment Range: Off to +19 dB Stereo3/4 to Left/Right Output 39 dB (max gain) 3.5mm Input Gain Adjustment Range: Off to +30 dB 3.
Crosstalk/Attenuation Adjacent Input Channels (1 kHz) >90 dB Left to Right Outputs (1 kHz) >70 dB Channel level control Kill (1 kHz) >85 dB Common Mode Rejection Ratio (Mic Input) 50 dB minimum (20 Hz to 20 kHz) 70 dB typical @ 1 kHz Meters 6 segment, peak reading (top green LED = +4 dBu) Signal/Overload Indicators Red LED lights 5 dB below clipping Dimensions 7.25" wide x 11" deep x 3.1875" high (18.42 cm x 27.94 cm x 8.1 cm) Weight PV6: 3.99 lbs (1.81 kg) PV6BT: 4.06 lbs (1.
PEAVEY ELECTRONICS CORPORATION LIMITED WARRANTY Effective Date: 11/01/2011 What This Warranty Covers Your Peavey Warranty covers defects in material and workmanship in Peavey products purchased and serviced in the U.S.A. and Canada.
FROM: Place Postage Here Peavey Electronics Corporation Attn: Warranty Department PO Box 1150 Meridian, Ms 39305
