PV®14AT • PV®14BT Compact Mixer 1/4”-Hi-Z CH.8 Only MAIN OUTPUTS USB A L DIRECT OUT DIRECT OUT 1 DIRECT OUT 2 DIRECT OUT 3 PV 14AT DIRECT OUT 4 DIRECT OUT 5 DIRECT OUT 6 9 AUX SEND DIRECT OUT 7 8 R L FS 3.
FCC/ICES Compliancy Statement This device complies with Part 15 of the FCC rules and Industry Canada license-exempt RSS Standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, that may cause undesired operation. Le présent appareil est conforme aux CNR d’lndustrie Canada applicables aux appareils radio exempts de licence.
ENGLISH PV®14AT and PV®14BT Compact Mixers Congratulations on purchasing the Peavey PV®14AT or PV®14BT Compact Mixer. The PV®14AT and PV®14BT are studio-quality mixing consoles designed to meet diverse needs while occupying a small space. These are the perfect consoles for small venue performances or home recording environments.
DIRECT OUT OUT PV14AT/PV14BT Front Panel (channels 1 - 8) 1 1 DIRECT OUT DIRECT OUT 5 HI PASS PASS HI 7 10 min 12 + + 0 HIGH - low min min COMP 0 +max high - max max 0 max - + high MID-MORPH 0 min AUX min min AUX -LOW+ min c min min 0 - AUX min 16 17 AUX max PAN MUTE L R right CLIP left PAN MUTE SIGNAL min max CLIP EFX left L 1 c 1 R right PAN MUTE CLIP SIGNAL min LEVEL 1 min EFX LEVEL SOLO min0 max low - + high MID-MORPH 0 min min min min left
PV14AT/PV14BT Front Panel (channels 1-7) 13 EFX SEND This control adjusts the level of the channel signal added to the effects mix. The signal is sent to the internal effects processor. Turning the knob to the left (min) will turn off effects on the associated channel, while turning the knob to the right will increase the amount of the selected effect. The effects send signal is taken after the channel level (18) so that adjustments made to the fader will also affect the send level.
DIRECT OUT DIRECT OUT DIRECT OUT DIRECT OUT DIRECT OUT PV14AT Front Panel (channels 1 29, 10, 113and 12)4 DIRECT OUT 5 PV 14AT DIRECT OUT 6 7 8 9 R 10 9/10 R 13/14 23 DIRECT OUT R 8 L AUX SEND DIRECT OUT 7 PV 14AT 9 13 L STEREO IN PAIRING 10 9/10 MAIN OUTPUTS 24 FS 3.5mm STEREO The 3.
PV14AT/PV14BT Front Panel 32 1/4”-Hi-Z CH.8 Only MAIN OUTPUTS USB A FS 3.5mm STEREO 9 31 L DIRECT OUT AUX SEND DIRECT OUT 7 8 R L PAIRING 10 9/10 L 13 L R STEREO IN R 14 11/12 R 13/14 LAYBACK AND BLUETOOTH 33 29 34 35 ANALOG BALANCE CONTROL Controls the balance between the analog channels 9/10. 30 DIGITAL BALANCE CONTROL Controls the balance between thePRE-SHAPE digital channels 11/12.
PV14AT/PV14BT Front Panel 36 37 ELECTRIC GUITAR PRE-SHAPE L HI PASS PHANTOM POWER 48V USB B max min GAIN USB A Bluetooth max GAIN - high H min - 7 max min LEVEL A/B 43 A B/ REC B/REC max R REC LEVEL min - + max HIGH 39 min 40 max RECORD LEVEL min 41 42 44 max TO CONTROL ROOM USB 0 0 MEDIA SELECT 0 EFX SELECT Auto- Controls level+of inputminjacks it is sent to both L and R. IfTUNE both jacks are connected, 13 is L and 14 + max the -LOW+13maxand 14.
T h x t E 2 Auto-TUNE HI PASS L HI PASS 9/10 R PHANTOM POWER 48V USB B PV14AT/PV14BT Front Panel min GAIN max min GAIN USB A Bluetooth max PV 10 min min 0 min - + max min - - MID-MORPH 0 min + max min - -LOW+ max EQ BYPASS - low GAIN + max min - + high min - -LOW+ + max 45 min min EQ BYPASS + max - max min max LEVEL A/B RECORD LEVEL min max min max R A A/B SELECT B/ REC B/REC REC LEVEL USB TO CONTROL ROOM -LOW+ + max min -LOW+ Press to
EFX and Auto-Tune (PV14AT only) EFX Select Knob: EFX Mode: In EFX Edit Mode (see Auto-Tune Switch), the EFX Select knob is used to navigate through the EFX presets. Turning the knob changes the EFX preset in the display. The new selection will be blinking in the display; push the EFX Select knob to choose the new effect. Once the effect has been selected, you can now edit the effect. To do this, press the EFX Select knob and the display will change to the current parameter setting of the preset.
The display will now change to the current Detune setting. Turn the EFX Select knob to change the Detune setting. The Detune setting determines how the Auto-Tune pitch correction is calibrated. When the Detune setting is 0 cents, this means the Auto-Tune is calibrated to the standard A440, or where the note A4 equals 440 Hz. The range of the Detune setting is -64 to 63 cents, a width of 128 cents.
ax gh H ax ax ax ht TE 2 min + max HIGH min - - low min - + high 0 -LOW+ max EQ BYPASS + max HIGH min - + max HIGH 0 0 MID-MORPH min + max HIGH 0 min max RECORD LEVEL min EFFECts media Press to Select Front + - + - + Panel - PV14AT/PV14BT low high MID-MORPH min MID 0 min -LOW+ max max min MID 0 min EQ BYPASS USB max TO CONTROL ROOM 0 -LOW+ max MEDIA SELECT 0 max min 52 -LOW+ Press to Select or edit 53 max 54 EFX SELECT 55 USB MEDIA
PV14AT/PV14BT Front Panel 58 STEREO/MONO MODE SWITCH In the mono position, the left and right buses are summed together after the faders. In this position, the L fader controls the level of the L bus, and the R fader controls the level of the R bus, allowing you to use the L and R buses as groups. For example, all vocals could be panned L and all instruments panned R. Then the L fader becomes the vocal master level and the R becomes the instruments master level.
- low + high MID-MORPH 0 min -LOW+ 63 MID-MORPH 0 max EQ BYPASS - low + high min -LOW+ low - + high MID-MORPH 0 low - + high MID-MORPH min - + max MID 0 EQ BYPASS min max EQ BYPASS min max - min min EQ BYPASS -LOW+ Press to Select or edit MEDIA SELECT 0 max EFFECts media Press to Select MID 0 PV14AT/PV14BT Front Panel -LOW+ -LOW+ -LOW+ max min + max EFX SELECT max USB MEDIA PLAYBACK DIGITAL EFFECT/MEDIA PLAYBACK KOSMOS-C HIGH CONTROL A very selective h
PV14AT/PV14BT Rear Panel 67 68 POWER ON 67 69 DIGITAL AUDIO PORT COMPUTER DC POWER INLET Use to connect the included power supply. Be sure the power supply is connected to the PV®14 before connecting to a power source. Use 15VDC, 1.6A adapter only. Replace only with Peavey part number 30908112. 68 POWER SWITCH This is the main power switch. 69 USB PORT TYPE B The USB port is used to connect the PV® Series USB mixer to a computer for recording or playing back digital audio to/from your computer.
4 3 2 ON/OFF STATUS RIGHT LEFT CHANNEL 13/14 BLUETOOTH INPUT USB B Streaming Input USB A Media Player Input CHANNEL11/12 3.
PV®14 Specifications Mic pre EIN = -126 dBu @ max gain with 150 ohm source Inputs Function Microphone (150 ohms) Min** Input Levels Nominal* -71 dBu -51 dBu Min Gain (4 dB) -17 dBu +5 dBu +16 dBu Input Z Input Gain Setting 2 kΩ Max Gain (59 dB) (ohms min) Max Bal/ Unbal Connector -39 dBu Bal XLR Pin 1 Gnd Pin 2 (+) Pin 3 (-) Bal 1/4" TRS; Tip (+) Ring (-) Sleeve Ground Unbal 1/4" TS; Tip (+) Sleeve Ground Unbal 3.
Gain Mic Input Gain Adjustment Range: 4 dB to 59 dB Mic Input to Left/Right Balance Output 79 dB (max gain) Line Input Gain Adjustment Range: -16 dB to 40 dB Line Input to Left/Right Balance Output 60 dB (max gain) Stereo 5/6 1/4" Gain Adjustment Range: Off to +18 dB Stereo 5/6 1/4"to Left/Right Output 42 dB (max gain) Stereo 5/6 3.5mm / RCA Gain Adjustment Range: Off to +28 dB Stereo 5/6 3.
Crosstalk/Attenuation Adjacent Input Channels (1 kHz) >90 dB Mute Button Attenuation (1 kHz) >90 dB Left to Right Outputs (1 kHz) >70 dB Channel Fader Kill (1 kHz) >85 dB Common Mode Rejection Ratio (Mic Input) 50 dB minimum (20 Hz to 20 kHz) 70 dB typical @ 1 kHz Meters 12 segment, peak reading (top green LED = +4 dBu) Signal/Overload Indicators Red LED lights 5 dB below clipping Dimensions 16.1875" wide x 17.3" deep x 2.1875" high (41.12 cm wide x 43.94 cm deep x 5.
PEAVEY ELECTRONICS CORPORATION LIMITED WARRANTY Effective Date: 11/01/2011 What This Warranty Covers Your Peavey Warranty covers defects in material and workmanship in Peavey products purchased and serviced in the U.S.A. and Canada.
U.S. CUSTOMER WARRANTY REGISTRATION Optional Product Extended Warranty Registration Give us some information and put your extended warranty into effect! Please take a few minutes to fill out this information/survey sheet to help us get to know and serve you better. To save time, submit your warranty registration online at www.peavey.com/support/warrantyregistration 1. 7.
FROM: Place Postage Here Peavey Electronics Corporation Attn: Warranty Department 5022 Hartley Peavey Drive Meridian, Ms 39305
