User Manual

LEVEL
min max
HIGH
LOW
0
-
+
min max
0
-
+
min max
PAN
c
RL
left right
EFX
min max
AUX
min max
LEVEL
COMP
min max
SIGNAL
CLIP
GAIN
3.5mm STEREO
MAIN
OUTPUTS
STEREO IN
FS
AUX SEND
MAIN L+R
1
1
2345/6
7/8
min max
DIRECT OUT
RL
L
L
R
R
PHANTOM POWER
48V
USB A
SOLO/MAIN
CONTROL ROOM
SOLO/MAIN
USB
min max
HEADPHONE/
SOLO/MAIN
DIRECT OUT
SOLO
SOLO
SOLO SOLO SOLO SOLO SOLO
5
6R
L
R
L
10
9
R
L
R
L
Press to
Select
Press to
Select
or edit
EFX SELECTMEDIA SELECT
DIGITAL EFFECT/MEDIA PLAYBACK
USB MEDIA PLAYBACK
EFFECts
media
min max
min max
comp
DIRECT OUT DIRECT OUT
HI PASS
MIC MUTEMUTE
MASTER
min max
RETURN TO MAIN RETURN TO AUX
DIGITAL
MEDIA CHANNEL
LEVEL A/B
min max
REC LEVEL
min max
RECORD LEVEL
min max
TO CONTROL ROOM
min max
ANALOG
MEDIA CHANNEL
RL
EFX
AUX
STEREO IN LEVEL
min max
ENABLE
A/B SELECT
B/REC
KOSMOS-C
min max
min max
HIGH
LOW
USB A
USB B
Bluetooth
MONO
(SUM)
STEREO
A
B/
REC
10 INPUT STEREO MIXER
WITH DIGITAL EFFECTS, MEDIA PLAYBACK AND BLUETOOTH
EQ BYPASS EQ BYPASS EQ BYPASS EQ BYPASS
PAIRING
MID-MORPH
0
low high
-
+
LEVEL
min max
HIGH
LOW
0
-
+
min max
0
-
+
min max
PAN
c
RL
left right
EFX
min max
AUX
min max
COMP
min max
GAIN
2
min max
comp
HI PASS
MID-MORPH
0
low high
-
+
LEVEL
min max
HIGH
LOW
0
-
+
min max
0
-
+
min max
PAN
c
RL
left right
EFX
min max
AUX
min max
GAIN
3
min max
HI PASS
MID-MORPH
0
low high
-
+
LEVEL
min max
HIGH
LOW
0
-
+
min max
0
-
+
min max
PAN
c
RL
left right
EFX
min max
AUX
min max
GAIN
4
min max
HI PASS
MID-MORPH
0
low high
-
+
LEVEL
min max
HIGH
LOW
0
-
+
min max
0
-
+
min max
BAL
c
RL
left right
AUX
min max
GAIN
5/6
min max
MID
LEVEL
min max
HIGH
LOW
0
-
+
min max
0
-
+
min max
0
-
+
min max
0
-
+
min max
BAL
c
RL
left right
AUX
min max
GAIN
7/8
1 2 3 4 5/6 7/8
min max
MID
PV 10AT
PV 10
ELECTRIC GUITAR PRE-SHAPE
9/10
9/10
EFX
MUTE
SOLO
SOLO
1/4”-Hi-Z CH.4 Only
SIGNAL
CLIP
SIGNAL
CLIP
SIGNAL
CLIP
SIGNAL
CLIP
SIGNAL
CLIP
MUTEMUTEMUTEMUTEMUTE
Auto-
TUNE
Auto-TUNE
AT AT
36
39 40 42
43
4441
37
PV10AT Front Panel
PHANTOM POWER
is Switch applies +48 VDC voltage to the input XLR connectors to power microphones requiring phantom power.
If phantom power is used, do not connect unbalanced dynamic microphones or other devices to the XLR
inputs that cannot handle this Voltage.
STEREO IN LEVEL 9/10
Controls the level of input jacks 9 and 10. If only one jack is connected, it is sent to both L and R. If both jacks are connected, 9 is L and 10 is R.
e Aux output could be fed to an external eects processor, and these jacks could be used as the eects return. Or a second mixer could be
daisy-chained in here.
LEVEL A/B
Controls the level of both A and B control room outputs. e active output is selected with A/B SELECT switch (41), when B/REC switch (42)
is up. When B/REC switch is down, only output A is controlled.
REC LEVEL
When B/REC switch is down, controls the level at the B/REC outputs. Note: When B/REC switch is up, this control is inactive.
A/B SELECT
When this switch is up, output A is on and output B is o. When this switch is down, output B is on and output A is o. Use this switch to
evaluate a mix on 2 dierent pairs of monitors, such as near eld and far eld monitors. By setting the level controls on both monitoring sys-
tems the same, a rapid A/B comparison can be made. Overall monitor level is controlled by LEVEL A/B. NOTE: When the B/REC switch (42)is
down, this switch is disabled , and the A output remains on at all times, fed by LEVEL A/B (39).
B/REC SWITCH
Determines the function of the B/REC output. When up, B/REC jack functions as monitor B output, selected by A/B select and controlled by
LEVEL A/B. When down, B/REC jack is an independent record output, with level controlled by REC LEVEL.
CONTROL ROOM MONITOR OUTPUT A
Connect powered monitors, or an amplier feeding monitor speakers here. Set the volume controls on the monitors A and B to be equal
when the A/B switch is toggled. e signal sent to this output is normally the Le/Right mix. e USB "To Control Room" pot (47) feeds the
USB return signal to these Monitor Outputs for use in a DAW recording setup. When the Solo LED is lit (62), only the soloed source(s) will
be heard. NOTE: When the B/REC switch is down, the A/B SELECT switch becomes disabled, and this output is output is controlled by the LEVEL
A/B control.
36
37
39
40
41
42
43