User Manual

Installing the Wheels
3. Fit the wheel onto the
ladder leg, and push
the wheel all the way
up so the sockets for
the bolts are aligned.
4. Insert the bolt into the
socket from the outer
side of the ladder leg,
and fit the nut onto the
threaded end of the
bolt.
5. Hold the nut in place
as you screw the bolt
into it with a slot-head
or Phillips screwdriver.
6. Repeat steps 4 and 5
for the other socket in
this wheel.
7. Repeat steps 2 through 6 for the other wheel.
1. Open the ladder and make sure it locks into position.
2. Position the wheel on the steps side of the ladder, and
align the wheel’s socket with the ladder leg.
Note: Make sure the wheel guard is facing the proper
direction, or the Ladder Cart will not roll on the wheels.