Operation Manual

ENGLISH
36
RETRIEVE VOICE MESSAGES VIA BASE
STATION
• The blinking display of base station shows
the number of new messages.
•
For playing new messages directly push
button Play voice messages/Pause .
•
For deleting the message push button
Delete Voice message .
Note:
The number of played messages which were
not deleted are permanently shown in display.
REMOTE ACCESS
You can operate your answering machine when
you are away from home. Simply make a call
to your phone with a phone using tone dialing
and enter your 3-digit PIN code.
1.
Make a call to your home number with a
phone using tone dialing.
2.
Push * twice after you heard the
announcement.
3.
Enter your PIN code (factory setting: 000).
• You now have access to your
answering machine, and you can
now listen to the new messages.
4.
Press a key to choose a function. See the
Remote access commands table below
for a list of available functions.
Key Function
1 Previous message
2 Play messages
3 Skip to next message
6 Stop playing
7 Delete current message
REMOTE CONFIGURATION OF
ANSWERING MACHINE
You can setup your answering machine when
you are away from home.
1. Make a call to your home number.
2.
The answering machine is answering
your call.
3. Push *-button twice.
4.
Enter your PIN code (factory setting: 000).
5. A signal tone appears and following
options are available:
Key Function
# Record voice message
0 Delete all messages
4 Play welcome message
5
Record new welcome message
6 Stop recording; stop playing
8 Turn o answering machine
9
Switch between welcome
messages; Switch on
answering machine
1
1
If the answering machine is switched
o, in answer mode it will answer the call
after ringing min. 10 times. After pushing
*-button twice you can enter the PIN code
and switch on the answering machine.
IM_PDP170_150518_V05_HR.indb 36 18/5/15 11:29 AM