Datasheet

30.9.2019 PeakTech® 8010 - PeakTech® - Convincing Top Technology
https://www.peaktech.de/productdetail/kategorie/schallpegelmessgeraete/produkt/peaktech-8010.html 1/2
BACK
PeakTech_8010.pdf (248.7 kB)
MANUAL
8010_Accessories.jpg (791.3 kB)
8010_Front.jpg (801.0 kB)
8010_Rear.jpg (237.8 kB)
8010_Side.jpg (248.3 kB)
PICTURES
PeakTech
Prüf- und Messtechnik GmbH
Gerstenstieg 4
DE 22926 Ahrensburg
Phone: 0049 4102 42343/44
Fax: 0049 4102 43416
Products Environmental measuring instruments Sound level meters PeakTech® 8010
PeakTech
®
8010 PROD-ID: P 8010
Sound Level Calibrator, 94 dB/114 dB
For sound level measurements in extreme conditions, at high altitudes or
high demands on the accuracy of the measurement results, sound level
meters should be checked prior to the measurement with a sound level
calibrator.
Also for calibration and verification of microphones in audio technology,
you need a sound level calibrator, which is designed to produce several
sound pressure levels at a fixed frequency characteristic.
This calibrator has two switchable calibration steps. The level “94dB”,
which corresponds to a sound pressure of 1 Pascal, and the step
“114dB”, which corresponds to a sound pressure of 10 Pascal. These are
generated at a 1 kHz sine wave signal, so that all measurements are
suitable for appliances with the DIN IEC 60942 Class 2 standard and
understandable for every audio engineer.
For calibration and verification of sound level meters
For testing of 1/2" audio microphones
High accuracy of +/- 0.5 dB
Output at 1 kHz sine wave
Switchable between 94 dB and 114 dB
Frequency accuracy of +/- 4%
Measurements according to IEC 60942 class 2
Accessories: 9 V battery, User Manual, Carrying Case

Summary of content (2 pages)