Datasheet

BACK
7100_Anwendung_Leuchte.jpg (1,081.4 kB)
7100_Anwendung_Stapler.jpg (1,631.7 kB)
7100_Anwendung_Traeger.jpg (863.1 kB)
7100_Anwendung_UV.jpg (1,657.9 kB)
P7100_klein.jpg (624.5 kB)
slide_7100.jpg (174.4 kB)
PICTURES
PeakTech
Prüf- und Messtechnik GmbH
Gerstenstieg 4
DE 22926 Ahrensburg
Phone: [phone]
Fax: [phone]
Products Measurement Accessories Magnet Holding Kit PeakTech® 7100
PeakTech
®
7100 PROD-ID: P 7100
Magnet Holding Kit
This magnetic holder is used to mount your measuring instrument on metal walls, e.g. doors of a subdivision, in switch cabinet construction, the motor
vehicle repair or even in shipbuilding.
In addition to the magnetic function, the mounting kit also offers a flap hanger opening for attachment to wall hooks and holders of non-magnetic
substrates, so the devices can also be easily attached to “lock and load” or other mounting systems.
With the tear-resistant strap many measuring instruments such as multimeters, laboratory thermometer, insulation testers and various environmental
measuring devices can be attached to the magnetic holder. But also working-lights or smaller screw- or tool pockets can be attached directly at the place
of use. The fastening can be made either by a buckle or directly by a Velcro fastener integrated into the band.
The metallic base is protected against scratches and damage by a full rubber coating of the magnetic holder so that it can also be safely applied to
painted surfaces.
Due to the wide range of applications and user-friendly handling, this fastening system is a must for every craftsman, installer and technician.
Suitable for many measuring instruments and tools
High load bearing capacity on magnetic substrates
Flap for attachment to perforated wall hooks
Flexible, fully rubberized material against scratches
Tear-resistant strap with buckle and Velcro closure
Accessories: Magnetic holders and fastening straps
Loading Capacity (Magnet) Max. 2 kg depending on substrate
Loading Capacity (Wall-Holder) Max. 7 kg
Strap Length Ca. 20 cm
Design Holder Full Rubber Coating
Dimensions Holder 40 x 70 x 8mm
Weight Ca. 40g
EAN-13 4250569403927
PeakTech® 7100 - PeakTech® - Convincing Top Technology http://peaktech.de/productdetail/kategorie/magnethalter/produkt/peakt...
1 von 1 02.08.17, 13:30