Datasheet

ManualsBrandsPeakTech ManualsBench Power SuppliesBench Top Power Supply, 60V, 6A, 150W, Adjustable

21.11.2019 PeakTech® 6227 - PeakTech® - Convincing Top Technology
https://www.peaktech.de/productdetail/kategorie/schaltnetzteile/produkt/peaktech-6227.html 1/2
BACK
Anleitung_PeakTech_6227_07-2019.pdf (652.7 kB)
MANUAL
6227_front.jpg (282.3 kB)
6227_left.jpg (386.3 kB)
6227_packing.jpg (555.1 kB)
6227_rear.jpg (426.2 kB)
6227_right.jpg (310.3 kB)
6227_zub.jpg (422.4 kB)
PICTURES
PeakTech
Prüf- und Messtechnik GmbH
Gerstenstieg 4
DE 22926 Ahrensburg
Phone: 0049 4102 42343/44
Fax: 0049 4102 43416
Products   Power Supplies   DC switching mode power supplies (3A to 60A)   PeakTech® 6227
PeakTech
®
 6227 PROD-ID: P 6227
DC switching power supply 0-60 V / 0-6 A with color LCD &
2 x USB
This  newly  developed  laboratory  power  supply  offers  a  controllable
0...60V or 0...6A DC main output with a maximum continuous power of
150W.  For  developers,  this  laboratory  power  supply  offers  two
switchable  USB  outputs  with  their  own  LCD  display  with  voltage  and
current values.
If you use a load up to 2.5A, you can set the output voltage up to 60V. If
you want to use a higher current up to 6A, set the load to a maximum of
25V. Of course, all stages are  also adjustable in between,  e.g. 30V/5A,
40V/3.7A or 50V/3A.
The  current  and  voltage  setting  also  can  be  done  when  the  output  is
switched  off.  By  pressing  the  knob  for  current  or  voltage,  the  setting
resolution can be fine/coarse switched from 1mA to 100mA or 10mV to
1V.
Due  to  the  high  range  of  functions  and  the  simple  operation  with  the
best  price-performance  ratio,  this  laboratory  power  supply  is  ideal  for
the education, hobby, development and service sector.
Blue LCD display showing the output voltage and current values
Green LCD display showing the USB output voltage and current values
150W constant output power
Adjustable voltage range: 0~60V at 0~2.5A and 0~25V at 2.5~6A
Voltage and current pre-selection with switchable output
C.C. (Constant Current) and C.V. (Constant Voltage) mode with
connected load
Protection against short circuit, overload and overtemperature
Safety: EN 61010-1
Accessories: Power cable, Connection Leads and Manual

Summary of content (2 pages)

PAGE 1
21.11.2019 PeakTech® 6227 - PeakTech® - Convincing Top Technology PeakTech Prüf- und Messtechnik GmbH Gerstenstieg 4 DE 22926 Ahrensburg Phone: 0049 4102 42343/44 Fax: 0049 4102 43416 Products Power Supplies PeakTech® 6227 DC switching mode power supplies (3A to 60A) PeakTech® 6227 PROD-ID: P 6227 BACK DC switching power supply 0-60 V / 0-6 A with color LCD & 2 x USB This newly developed laboratory power supply offers a controllable 0...60V or 0...
PAGE 2
1.11.2019 PeakTech® 6227 - PeakTech® - Convincing Top Technology Output Voltage 0 ~ 60 V DC (@2,5 A) Output Current 0 ~ 6 A DC (@ 25 V) Output Power 150 W Display Resolution (V) 10mV Display Resolution (A) 1mA Setting Resolution (V) 10mV / 1V switchable Setting Resolution (A) 1mA / 100 mA switchable Ripple & noise ≤ 5 mV RMS; ≤ 20 mA RMS Load regulation ≤ 0.05% + 5 mV, ≤ 0.5% + 5 mA Line regulation ≤ 0.1% + 3 mV, ≤ 0.2% + 3 mA Display accuracy +/- 0,5% + 5 dgt.