User Manual

3.Quick Start
5
3.1.2 Rear Panel
①
②
③
⑤
④
⑥
Figure 3-2 Rear panel overview
①
Local Area
Network (LAN)
Connector
The power supply
can be connected to the network for
remote control via this connector.
②
USB Device
Connector
Connect as a "slave device" with an external USB device, such
as connect the instrument to a PC.
③
COM Connector
Connect the power supply with external equipment as serial
port.
④
Power socket
AC input connector
⑤
Fuse
Line fuse
⑥
Fan
Fan inlet
3.1.3 User Interface
When the output mode is in independent output, or channel tracking mode, there are
two display modes: All channel mode (CH1 & CH2 & CH3), Dual channel mode (CH1 &
CH2). Press the Mode panel key to switch between the modes.
 All Channel Mode