User Manual

4.Front Panel Operation
18
4.7 Utility Settings
4.7.1 Language
Press the Utility key, turn the knob to select [Utility]. The Language sub menu is selected.
Press the
＜
/
＞
key to choose the desired language. The supported languages
include: Chinese, English and so on.
4.7.2 Brightness
Press the Utility key, turn the knob to select [Utility]. Press the ▼ key to select
Brightness submenu. Press the
＜
/
＞
key to adjust the screen brightness. The
brightness can be set to 0%, 25%, 50%, 75%, 100%.
4.7.3 Beeper
Press the Utility key, turn the knob to select [Utility]. Press the ▼ key to select Beeper
submenu. Press the
＜
/
＞
key to turn on/off the beeper. When the beeper is on, the
icon will be lighted on the status bar. When the system prompts the instrument will
make a buzzing sound, e.g. cutting off the output due to O.V.P/O.C.P.
4.7.4 Clock
Press the Utility key, turn the knob to select [Utility]. Press the ▼ key to select Clock
submenu. Use the numeric keys to input, press the key to confirm. Press the
＜
/
＞
key to move the cursor.
4.8 System Info
4.8.1 View System Information
Press the Utility key, turn the knob to select [Info]. The Info sub menu is selected. You
can view the version, serial number, and checksum.
4.8.2 Set as Default
Press the Utility key, turn the knob to select [Info]. Press the ▼ key to select Default
submenu. Press the key to use the factory defaults, see table below.
Output
settings
Output
VOLT
CURR
CH1
12.00V 2.000A
CH2
CH3
Parallel
12.000V
6.000A
Series
36.000V
2.000A