User Manual

4.Front Panel Operation

displayed in the chart in the data processing interface.

(3) Press

←

to back to sub menu selection.

4.4.4 Turn On/Off Programmable Output

In the data processing interface:

 Independent Mode

Press orange ON/OFF key to turn on/off the programmable output of Channel 1.

Press blue ON/OFF key to turn on/off the programmable output of Channel 2.

 Parallel/Series Mode

Press orange ON/OFF key to turn on/off the programmable output.

In the data processing interface:

Press the ▼ key to select Start submenu. Press the

＜

＞

key to select the channel

(CH1, CH2 or ALL), press the key to enter the data processing interface and output

the selected channel.

Note:

In the process of programmable output, closing the channel output will reset the timer;

turning on the channel again will restart the programmable output and the timer.

4.5 Save Settings/Auto Record

4.5.1 Save Settings

You can store, recall and delete current setting parameters. The storage memory could be

set as internal or external (USB flash device). Up to 100 groups of settings can be saved.

Press the Record key. The Save Settings menu is selected.

(1) The Memory sub menu is selected. Press the

＜

＞

key to select Internal or

External.

(2) Press the ▼ key to select Save submenu. Press the ＜ / ＞ key to select the channel

(CH1, CH2 or CH3), press the key to save the setting of the selected channel.

Note: When the memory is set as External, the setting will be saved to U disk as a

CSV file, the directory is P6181\Record_Option.

(3) Press the ▼ key to select Delete submenu. Press the key, a red box will show in the

table, indicating the selected item. Press the ▲ / ▼ key to select. Press the

＜

＞

key to turn the page. Press the key to delete. Press

←

to back to