User Manual

4.Front Panel Operation

Press the orange Curr/CC key, the first digit of the CH1 set current is flashing. Press

the ▼ key, the first digit of the CH1 O.C.P is flashing, indicating the value is editable.

There are two methods to change the value.

Modify: Turn the knob to change the value. Press the

＜

＞

key to move the

cu rso r. Press the knob or the key to confirm.

Input: Use the numeric keys to input, the input box of Channel 1 limit current will

pop up. Enter a desired value. Press the key to confirm.

 Set the O.C.P of CH2

Press the blue Curr/CC key, then press the ▼ key to enter edit mode. You can set the

value in the same way as CH1 above.

 Set the O.C.P of CH3

Press the Curr CH3 key, then press the ▼ key to enter edit mode. You can set the

value in the same way as CH1 above.

4.4 Programmable Output

The programmable output function can preset up to 100 groups of timing parameters.

When you turn on the programmable output, the instrument will output the

pre-specified voltage, current in pre-specified time.

4.4.1 Data View

Press the Program key. The Data view menu is selected.

(1) The Memory sub menu is selected. Press the

＜

＞

key to select Internal or

External.

(2) Press the ▼ key to select Import submenu. Press the key to import data.

(3) Press the ▼ key to select Export submenu. Press the key to export data.

Note: When the memory is set as External, the programmable data file will be

export to U disk, the directory is P6181\Program.

(4) Press the ▼ key to select Clear Data submenu. Press the key to clear data.

4.4.2 Output Set

Press the Program key, turn the knob to select [Output Set].

(1) The Cycle Mode sub menu is selected. Press the

＜

＞

key to select Oder or

Loop.

(2) Press the ▼ key to select Start Point submenu. Use the numeric keys to input (1 to

100), press the key to confirm.