Datasheet

2. Introduction
Digitally controlled, high-precision DC power supply with variable voltage and Current setting. An
advanced microprocessor controls the generation, display, control and protection of voltage,
current. This technology improves the accuracy of the generation and control, it also facilitates the
operation and the reading of the values. Henceforth should be emphasized that the voltage can be
fixed over the whole range, making the convenience is increasing and unnecessary, inaccurate,
steps can be prevented.
The
PeakTech
®
6075
device can either be in series or in parallel mode. Through this, if the device
is switched to seriel-mode, the Output voltage increases to 60 V DC max. In parallel mode, the
current output doubles to 10 A DC.
Caution!
The PeakTech
®
6070 / 6075 provides a keylock function. Please read chapter 4.5 on page 15
for more detailed information.
Caution!
Laboratory Power Supplies are not designed for charging batteries. Any use of this type can
cause serious damage to the device, which are exempt from any legal claims whatever.
-10-