Datasheet

5. Amp display: indicating slave output current by analogue meter or
LCD.
6. Volt display: indicating slave output voltage by analogue meter or
LCD.
7. Function switch: for selecting single-use of both adjustable outputs,
press "Normal"-button
8. Function switch: for selecting series-use of both adjustable outputs,
press "Series"-button
9. Function switch: for selecting single-use of both adjustable outputs,
press "Parallel"-button
10. Volt display: indicating master output voltage by analogue meter or
LCD.
11. Master constant-current indicator: the LED illuminates when the
master output is in current-regulated state.
12. Mater constant-voltage indicator: the LED illuminates when the master
out- put is in voltage-regulated state.
13. Power switch: the unit is "ON" when this button switch is depressed,
while CV LED (3) (12) or CC LED (1) (11) illuminating.
14. Master constant voltage adjustment: adjusting master output
voltage.
15. Fixed 5V output Terminal (+): connecting the positive terminal of
load.
16. Fixed 5V output Terminal (-): connecting the negative terminal of
load.
17. Master constant current adjustment: adjusting master output current
value (adjusting the current-limit protection point).
18. Master output Terminal (+): connecting the positive terminal load.
19. Case ground: connecting the case to ground.
20. Master output terminal (-): connecting the negative terminal of load.
21. Slave output terminal (+): connecting the positive terminal of load.
22. Case ground: connecting the case to ground.
23. Slave output terminal (-): connecting the negative terminal of load.
24. AMP display: indicating master output current by LED
25. Output ON/OFF switch: output off, when pressing the button
26. Fuse holder
27. Case ground: connecting the case to ground
28. Cooling Fan
29. Main voltage input socket
30. Control switch: to choose the input voltage 110 V or 220 V
-14-