Datasheet

2. Operation
2.1. Controls and description P 6015 A
02. Amp display: indicating output current by analog meter
03. Volt display: indicating output voltage by analog meter
04. Voltage fine-adjustment: fine-adjusting output voltage
05. Voltage coarse-adjustment: coarse-adjusting output voltage
06. Constant-voltage indicator: the LED illuminates when the units are in voltage regulated state
07. Power switch: the unit is „ON“ when this button switch is depressed
08. Output terminal (+): connecting the positive terminal of load
09. Case ground
10. Output terminal (-): connecting the negative terminal of load
11. Current adjustment: adjusting the current-limit protection point
12. Constant-current indicator: the LED illuminates when the units are in current regulated state
2.2. Controls and description P 6035 D
01. Amp and Volt display: indicating output current and voltage
05. Voltage coarse-adjustment: coarse-adjusting output voltage
07. Power switch: the unit is „ON“ when this button switch is depressed
08. Output terminal (+): connecting the positive terminal of load
09. Case ground
10. Output terminal (-): connecting the negative terminal of load
11. Current adjustment: adjusting the current-limit protection point
12. Constant-current indicator: the LED illuminates when the units are in current regulated state
13. Constant-voltage indicator: the LED illuminates when the units are in voltage regulated state
15. Output terminals: 12 V/0,5 A (P 6035 D/P 6040 A)
16. Output terminals: 5 V/ 0,5 A (P 6035 D/P 6040 A)
-9-
8.
10.
9.
11.
1.
5.
7.
12.
13.
16.
2.
3.
4.
5.
6.
7.
8.
9. 10.
11.
12.