User Manual

3. Front Panel Controls

1. Power switch: the LED illuminates when the power is „ON“

2. Fuse holder for the unit

3. DC output terminal (-): connecting the negative terminal of DC load

4. Case ground: connecting the case to the ground

5. DC output terminal (+): connecting the positive terminal of DC load

6. AC output terminal: connecting the AC load

7. Case ground: connecting the case to the ground

8. AC output terminal: connecting the AC load

9. Constant-current indicator: the LED illuminates when the DC output is in

current-regulated state

10. Constant-current indicator: the LED illuminates when the DC output is in

voltage-regulated state

11. Over current indicator: the LED illuminates when the AC output is over

current

12. DC constant current adjustment: adjusting DC output current value

(adjusting the current-limited protection point)

13. DC Amp display: indicating DC output current by LED

14. DC constant voltage adjustment: adjusting DC output voltage

15. DC Voltage display: indicating DC output voltage by LED

16. AC current adjustment: adjusting AC output current by LED

17. AC Amp display: indicating AC output current by LED

18. AC voltage adjustment: adjusting AC output voltage

19. AC Voltage display: Indicating AC output voltage by LED

-10-

8 1