Datasheet

4.5. Temperature of reflective background
The background temperature between 0 ° C and + 36 ° C can be
set.
Set the temperature compensation " " for reflective background
in this option.
About warm or cold objects the surface temperature and the
measurement accuracy can influence.
When the radiation coefficient of the surface of the measured object
is low, this phenomenon is obvious.
Under certain circumstances, you should adjust the temperature of
the reflective background to obtain optimum measurement results.
4.6. Marking of the spot temperature
1. Press the “ “ key to enter the MENU mode.
2. Press the “▲“ or „▼“ key to choose the point temperature “ “
menu.
3. Press the “ “ key and then press the “▲“ key to open and
close the point temperature tag. If turning on, the marking of
spot temperature indicates that the hot spot or cold spot in the
screen needs additional appraisal (MIN/MAX temperature).
4.7 Unit of temperature
The product displays the temperature in unit of °C or °F.
-30-