User Manual

“1”. Display pressure and air velocity value.
“2”. Display air velocity and air flow value.
“3”. Display pressure, air velocity and air flow value.
4. Press to store the new setting in memory.
6. Clear Memory Setting
1. When the meter is in Setup mode, Press or to scroll to the clear memory setup
option.
2. Press to select the desired sample. There are three choices for selecting.
PRESS VEL FLOW: clear all pressure, velocity and flow sample data.
PRESS: clear all pressure sample data.
VEL: clear all velocity sample data.
FLOW: clear all flow sample data.
3. Press or until the display show “YES”, press , then clear the
memory.
-32