User Manual

5.2. Changing a Setup Option
1. Press or to scroll to the setup option you want to change.
2. Press to indicate that you want to change this setting.
3. Press or until the setting you want to use appears on the display.
Press to store the new setting in memory.
Notes:
Setup is disabled in MIN/MAX/AVG mode.
5.3. Duct dimension units Setting
1. When the meter is in Setup mode, press or to scroll to the duct dimension units
setup option.
2. Press button. It shows “in” or “cm” on the display.
3. Press or to scroll to the setup option you want to change.
4. Press to store the new setting in memory.
-28-