Datasheet

3) Press the HOLD/LS key (9) briefly to switch to the
setting of the correction factor. This will flash now.
4) Change the correction factor according to the desired
value with the ▼ ▲ arrow keys.
5) Save this value by holding the HOLD / LS key (9) for
about 2 seconds.
6) The device now displays the correction factor (L1 to L9),
which you edited.
8.4. Table of Color Correction Factors
Lightsource
Factor
CIE Standar Light Source A
1.000
LED Daylight White
0.990
LED Red
0.516
LED Amber
0.815
LED Green
1.216
LED Blue
1.475
LED Purple
1.148
Neon White
0.870
Neon Blue
1.286
Neon Green
1.167
Neon Pink
0.760
Neon Purple
0.804
Neon Red
0.671
Neon Amber
0.840
8.5. Color Correction Factor
If the measured light source differs from the 2856K Planckian
source the PeakTech 5086 is calibrated too, an error occurs due
to the spectral mismatch of the photometers. This error is
corrected by a color correction factor (CCF), as follows:
-27-