User Manual

3. Then the display will show the environment temperature reading
value (°C/°F) directly.
4. Connect the temperature probe into the K-type thermocouple
socket (10).
5. Touch the end of the temperature sensor to the area or surface
of the object to be measured. The display will show the
temperature reading value (°C/°F) directly.
5.6. Battery Replacement
Note the condition of the 9-V-battery using the procedure described
above. If the battery needs to be replaced, open the battery cover,
remove the spent battery and replace with a battery of the same
type.
Batteries, which are used up dispose duly. Used up batteries are
hazardous and must be given in the for this being supposed
collective container.
Statutory Notification about the Battery Regulations
The delivery of many devices includes batteries, which for example serve
to operate the remote control. There also could be batteries or
accumulators built into the device itself. In connection with the sale of
these batteries or accumulators, we are obliged under the Battery
Regulations to notify our customers of the following:
Please dispose of old batteries at a council collection point or return
them to a local shop at no cost. The disposal in domestic refuse is
strictly forbidden according to the Battery Regulations. You can
return used batteries obtained from us at no charge at the address
on the last side in this manual or by posting with sufficient stamps.
-25-