User Manual

Brightness
Set display brightness
(30 – 100%)
Auto Power Off
Set the time unitl device powers
off automatically (disabled,
3/15/60 min)
Display Timeout
Set the time unitl display powers
off automatically (disabled,
30/60/180 sek.)
Keypress signal Enable/Disable key sound
Memory status
Displays the stored data and
selected Memory Type (internal,
micro-SD in MB)
Factory setting Reset device to factory settings
Change the desired options exit the menu by pressing the "ESC"
key to return to the previous menu. The changes are saved
automatically.
3.1.7. Measure Set
The menu "MEASURE SET "is a sub-
menu you can reach from the IR
camera, IR measurement and the
measurement of dew point" with
pressing the “ENTER "key during the
measurement in one of these modes.
Press the and keys to select the
desired menu item, where you want to
change options. Afterwards press the
"Enter" key to confirm the executed
changes.
-46-