Datasheet
17.2. Amplitude
17.2.1. Messbereich
Bereich
P 4130-1
10MHz bis 1.5GHz DANL bis +30 dBm
P 4135-1
10MHz bis 2.2GHz DANL bis +30 dBm
P 4140-1
10MHz bis 3.0GHz DANL bis +30 dBm
17.2.2. Maximaler Eingangspegel
DC Spannung
50V
Fortlaufende RF Leistung
+30dBm (1.0 W)
Maximaler Beschädigungspegel
+40dBm (10W)
17.2.3. DANL
0 dB attenuation, RBW=VBW=100 Hz, sample detector, trace average≥ 50
Display Average
Noise Level
(Vorverstärker
aus)
100kHz bis 10MHz
-90dBm, typical value-110dBm
10MHz bis 1.5GHz (P4130-1)
-120dBm+6 x (f/1GHz)dB,
typisch -125dBm
10MHz bis 2.2GHz (P4135-1)
10MHz bis 3.0GHz (P4140-1)
Display Average
Noise Level
(Vorverstärker
an)
100 kHz bis 30MHz
- 90dBm, typisch -110dBm
30MHz bis 1.5GHz (P4130-1)
-135dBm+6 x (f/1GHz)dB,
typisch -140dBm
30MHz bis 2.2GHz (P4135-1)
30MHz bis 3.0GHz (P4140-1)
17.2.4. Anzeigepegel
Logarithmische Skala
1dB bis 200dB
Lineare Skala
0 bis Referenzpegel
Anzahl Anzeigepunkte
601
Anzahl Messkurven
3+ Arithmetische Kurve
Detektor Modi
positive peak, negative peak, sample detection,
standard detection, RMS, average voltage
Trace Funktionen
Clear write, max hold, min hold, average, view,
close
Skaleneinheit
dBm, dBmV, dBμV, V, W
17.2.5. Frequenz response
10dB attenuation, relativ zu 50MHz, 20℃ to 30℃
Frequenz response
(Vorverstärker aus)
1.0MHz to 1.5GHz (P4130-1)
1.0MHz to 2.2GHz (P4135-1)
1.0MHz to 3.0GHz (P4140-1)
±1.0dB
Frequenz response
(Vorverstärker an)
50MHz to 1.5GHz (P4130-1)
50MHz to 2.2GHz (P4135-1)
50MHz to 3.0GHz (P4140-1)
±1.0dB
17.2.6. Eingangsdämpfungsfehler
Einstellbereich
0 bis 50dB, Schritt ist 1dB
Schaltunsicherheit
fc=50 MHz, relativ zu 10dB, 20℃ to 30℃ <0.5dB
-45-