Datasheet
8.3. Average Times
Set the average times of trace.
Key points:
More averaging will reduce the noise and influence of other random signals, also better display the
stable signal characteristics. The more averaging takes, the smoother the trace will be.
You can modify this parameter by numeric keys. For more details, please refer to “Parameter Input”.
Table 2-19 Average Times
8.4. Math
1. Function
Set the computational method of the math trace.
A-B: subtract Trace B from Trace A.
A+Constant: add a constant to Trace A.
A-Constant: subtract a constant from Trace A.
2. A
Assign a value to A from Trace 1, Trace2 or Trace 3. The default is Trace 1 (“T1”).
3. B
Assign a value to B from Trace 1, Trace2 or Trace 3. The default is Trace 1 (“T2”).
4. Constant
Set the value of constant for math trace.
You can modify this parameter by numeric keys. For more details, please refer to “Parameter Input”.
Table 2-20 Constant in math operation
5. Operate
Enable or disable the display of math trace, the default is off.
8.5. All Clear
Clear all trace on screen. Advanced measurement stop when as there is no available data source.
-29-
Parameter
Description
Default
100
Range
1 ~ 1000
Unit
No
Knob Step
No
Arrow Keys Step
No
Parameter
Description
Default
0 dB
Range
-300 dB ~ 300 dB
Unit
dB