Datasheet

Rear panel
1. VGA port
This port provides VGA vedio signal output, connect this interface with VGA cable
2. RS-232 port
This port provides serial data output, connect this interface with RS-232 cable
3. TRIGGER IN
When the Spectrum Analyzer is under external trigger mode, this connector receives an external
trigger signal. The external trigger signal is input to the Spectrum Analyzer through BNC cable
4.10MHz IN/OUT
Realize reference clock input/ output through BNC cable
5. AC Power Connector
The AC power specifications that this instrument supports is: 100 V - 240 V, 45 Hz - 440 Hz
6.USB Device
The Spectrum Analyzer could connect with external USB device as “slave device”
7.LAN
This interface is used to connect the spectrum analyzer to the LAN to realize remote control.
-9-