Datasheet

5.16. To Output Arbitrary Signals
Press button to call the user interface of Arbitrary signal, the Arbitrary waveform
parameters can be set by operating the Arbitrary setting menu on the right.
The menu items of Arbitrary waveform are: Frequency/Period, Amplitude/High Level,
Offset/Low Level, Built-in Waveform, Editable Waveform. You can operate the menu by
using the menu selection buttons on the right.
To set the Frequency/Period, Amplitude/High Level, Offset/Low Level, please refer to “To
Output Sine Signals” on page 67.
The Arbitrary signal consists of two types: the system built-in waveform and the
user-definable waveform.
Figure 0-14: The User Interface of Arbitrary Signal
5.17. To Select the Built-in Waveform
There are 26 built-in Arbitrary waveforms.
Menu
Settings
Explanation
Common
StairD/StairU/StairUD/Trapezia/RoundHalf/
AbsSine/AbsSineHalf/SineTra/SineVer
Choose common Waveforms
Maths
ExpRise/ExpFall/Sinc/Tan/Cot/Sqrt/x^2
Choose Math Waveforms
Window
Rectangle/Gauss/Hamming/Hann/Bartlett/
Blackman/Laylight
Choose Window Waveforms
Others
DC/Heart/Round
Choose other Waveforms
Back
Back to the previous menu
-74-