Datasheet

4
Modulation In
Modulation waveform input, use it as external signal
source
5
RS232 port
Through this interface, the generator can be
connected to a PC and controlled via PC software
6
Power socket
AC input connector
7
Fuse
Use the specified fuse according to the voltage scale.
8
Power switch
Switch between 110V and 220V.
9
USB Host port
Connect as a "host device" with an external USB
device, such as connect a USB disk to the instrument.
10
USB Device port
Connect as a "slave device" with an external device,
such as connected to a PC and controlled via PC
software.
4.3. User Interface
Figure 0-3 User interface (take Sine for instance)
1
Current channel
2
Parameter 1, display parameter and edit the focused parameter
3
Current signal type or mode
4
The setting menu of current signal or mode
5
Parameter 3, display parameter and edit the focused parameter
6
Parameter 2, display parameter and edit the focused parameter
7
Display current waveform
8
Offset/low level, depends on the highlighted menu item on the right
9
Amplitude/high level, depends on the highlighted menu item on the right
10
Frequency/period, depends on the highlighted menu item on the right
11
Load, High Z represents high resistance
-62-