User Manual

24
5. :SYSTem Commands
The commands of system control are as follows:
1. :SYSTem:VERSion
Syntax
:SYSTem:VERSion?
Function
Query the software edition number of the instrument.
Explanations
Example
:SYSTem:VERSion? returns “V_4.0.1”
2. :SYSTem:CLKSrc
Syntax
:SYSTem:CLKSrc?
:SYSTem:CLKSrc {INTernal|EXTernal}
Function
Query/set the system clock source.
Explanations
When the clock source is selected as external, the setting will fail if the
interface of clock source on the rear panel is not connected correctly.
Example
:SYSTem:CLKSrc? returns "INT" or "EXT". :SYSTem:CLKSrc EXTernal
3. :SYSTem:LANGuage
Syntax
:SYSTem:LANGuage?
:SYSTem:LANGuage {SIMPchinese|TRADchinese|ENGLish}