User Manual

8
:FUNCtion:{SINE|SQUare|RAMP|PULSe |ARB}:AMPLitude {<amplitude>}
Function
Query/set the amplitude (PK-PK) of output function for current channel.
Explanations
<amplitude> is the amplitude set by users, the default unit is Vpp.
Example
:FUNCtion:RAMP:AMPLitude 2 sets the amplitude as 2Vpp
6. :FUNCtion:{SINE|SQUare|RAMP|PULSe|NOISe|ARB}:OFFSet
Syntax
:FUNCtion:{SINE|SQUare|RAMP|PULSe|ARB}:OFFSet?
:FUNCtion:{SINE|SQUare|RAMP|PULSe |ARB}:OFFSet {<offset>}
Function
Query/set the offset voltage of output function for current channel.
Explanations
< offset >is the offset voltage set by users, the default unit is V.
Example
:FUNCtion:RAMP:OFFSet 2 sets the offset voltage as 2V.
7. :FUNCtion:{SINE|SQUare|RAMP|PULSe|NOISe|ARB}:HIGHt
Syntax
:FUNCtion:{SINE|SQUare|RAMP|PULSe|ARB}:HIGHt?
:FUNCtion:{SINE|SQUare|RAMP|PULSe |ARB}:HIGHt {<high level>}
Function
Query/set the high level of output function for current channel.
Explanations
<high level> is the high level set by users, the default unit is V.
Example
:FUNCtion:RAMP:HIGHt 2 sets the high level as 2V.