Datasheet

82
5.21. How to Edit a Stored Waveform
(1) Enter the operation menu: Press →Editable Wform →Edit Wform.
(2) Enter the storage path of the desired waveform file. Turn the knob or press /
direction key to select the desired waveform file.
(3) Choose Recall suppress.
5.22. How to Delete a Stored Waveform
(1) Press Save function button to enter the file system.
(2) Enter the storage path of the desired waveform file. Turn the knob or press /
direction key to select the desired waveform file.
(3) Choose Delete.
5.23. To Output DC
(1) Press CH1/2 to select the channel that you want to output DC (P4125 – 4165) or
press DC -key (P 4124).
(2) Press button, then press F4 to enter the Built-in Wform menu.
(3) Press F4 to select Others. Select DC. Press F1 to output DC.
(4) Press F3 , confirm whether the "Offset" menu item is highlighted; if not, press F3
to switch into "Offset". In Parameter 3, a cursor appears under the value of offset.
Use the knob or the number keys to set the desired value and choose the unit.
Figure 0-15: The DC Setting Interface