Datasheet

73
5.4. To Set the Frequency/Period
Press F1 button, the chosen menu item is highlighted, the focused parameter is
displayed in Parameter 1. Press F1 button to switch between Frequency/Period.
Two methods to change the chosen parameter:
 Turn the knob to change the value of cursor position. Press / direction key to
move the cursor.
 Press a number key in the front panel, an input box will pop up; keep going to input
the value. Press direction key to delete the last number. Press F1 ～ F3 to
choose the unit, or press F4 to go to next page and choose other units. Press
F5 to cancel the input.
Figure 0-6: Set the frequency using number keys
5.5. To Set the Amplitude
Press F2 , confirm whether the "Ampl" menu item is highlighted; if not, press F2 to
switch into "Ampl". In Parameter 2, a cursor appears under the value of amplitude. Use
the knob or the number keys to set the desired value.
5.6. To Set the Offset
Press F3 , confirm whether the "Offset" menu item is highlighted; if not, press F3 to
switch into "Offset". In Parameter 3, a cursor appears under the value of offset. Use the
knob or the number keys to set the desired value.
5.7. To Set the High Level
Press F2 , confirm whether the "Hi_Level" menu item is highlighted; if not, press
F2 to switch into "Hi_Level". In Parameter 2, a cursor appears under the value of
amplitude. Use the knob or the number keys to set the desired value.