User Manual

80
4.3.5 To set Amplitude
For example, specify a amplitude to 1.6Vrms.
Press 〖Ampl/High〗softkey and then set the amplitude to 1.6Vrms using the numeric
keypad or the knob and arrow keys 【 <】【 >】. If you use the keypad, press 〖 Vrms〗 softkey
to finish entering the value.
4.3.6 To set offset
For example, specify an offset to -25mVdc.
Press 〖Offset〗softkey and then set the offset to -25mVdc using the numeric keypad or the
knob and arrow keys 【 <】 【 >】. If you use the keypad, press 〖mVdc〗 softkey to finish
entering the value.