User Manual

117
waveform data to Excel for editing or modification, also can create any waveform in Excel and
download to device for outputting the waveform signal.
5.15 Common Operation
Press 【Utility】key, the operating window and menu are appears.
5.15.1 Status store
The setting for the instrument, such as waveform, frequency and amplitude, are commonly named as
instrument state parameters. The internal of instrument are divided into 5 non-volatile areas and can
store 5 group state parameters.
Press〖Status Store〗softkey then select ‘Store’ to save current state to specified non-volatile
locations, which won’t be lost even turn off the power.
But store a new group of state parameters will cover the previous state setting. In order to protect the
previous state, the waveform generator will pop up a prompt ‘Will cover original data, Store?’ Only
press 〖Yes〗softkey to enable the store. Otherwise, to press 〖Cancel〗softkey.
Press 〖Status Store〗softkey and display 5 memory location,〖Default State〗,〖Power On State〗,
〖 User 0 State〗, 〖 User 1 State〗and〖User 2 State〗. Press any one of five to store present state
to appointed location. The ‘Store’ will show after finishing store.
〖Default State〗location store the factory default state, to prevent it from damage, state storage can’t
be allowed in〖Default State〗.
〖Power On State〗location store the state when instrument power on. User can store the common
states to this location, which will be recalled automatically when power on the generator.
The memory location of〖 User 0 State〗,〖 User 1 State〗and〖User 2 State〗can be used to store
three group customization states for special use.