User Manual

115
5.14.6 Modify Arbitrary Waveform
Here introduce how to modify waveform. For example, to add a narrow pulse on a Sine, the operating
steps as below:
(1) Press【Waveform】key and select a Sine then return.
(2) Set horizontal coordinate to be 2048 and vertical coordinate be 15000. Press〖Vector Start〗
softkey.
(3) Set horizontal coordinate to be 2050 and vertical coordinate be 15000. Press〖Vector End〗
softkey.
(4) Press 〖Hor_x Zoom〗softkey and set the pantographratio to be 18.5. Press 〖Hor_x Shift〗
softkey and set the horizontal shift value be 2000. Then you can watch detail of added pulse.
5.14.7 Download Waveform
It is available to edit a simple user-defined waveform by keypad, and easy to be modified. But for
complicated waveforms, it will take too much time. Here introduce how to edit on computer by
waveform-editor software and download the waveform to the generator. Follow below steps:
(1) Install the waveform edition software written in the CD to the PC, connect the generator to PC
with an USB cable (enclosed with manual of waveform edit).
(2) Run the waveform edition software to edit a user-defined waveform.
(3) Download the user-defined waveform to the generator, which will enter into working mode of
waveform edit. The download user-defined waveform will show at edit window.