Datasheet

7
4.1 Reference
4.1.1 Keypad description
There are totally 32 keys in the front panel, of which, 26 keys with certain definition
embraced with【】.
10 function keys:
【Continue】【 Modulate】【 Sweep】【 Burst】【 Dual Channel】【 Counter】【 CHA/CHB】
【Waveform】【Utility】【Output】.
While, 【Utility】key is used to set common parameter and 【Output】key is used to enable
or disenable output port.
12 keys in numeric keypad:
【0】【1】【2】【3】【4】【5】【6】【7】【8】【9】are used to enter numbers.
【.】is used to enter decimal point and 【-】is only available to enter allowed minus.
Four arrow keys:
【<】【>】were used to move the cursor left or right.
【∧ 】【∨ 】were used to increase and decrease the displayed number when setting
frequency and amplitude.
The balance 6 keys under display are menu operation softkeys, embraced with 〖〗 and
used to select menu or unit.
4.1.2 Display description
The display screen is divided into three sections:
Top section: output waveform
Middle section: parameters display of Frequency or Amplitude or Offset etc.
Bottom section: display of menu or unit.