Datasheet

7.7. 3 Trigger Output:

Output Level: TTL Compatible

Input Impedance: 1kΩ

7.7.4 Connector: isolated with case, limited voltage for connector housing is

±42Vpk

7.8 Frequency Counter

7.8.1 Frequency Range: 10mHz to 350MHz Resolution: 7 digits/s

7.8.2 Measurement of Period and Pulse-width: 100ns to 20s

7.8.3 Duty Cycle Measurement: 1% to 99%

7.8.4 Count Measurement: 1 to 9999999999

7.8.5 Sensitivity:

20mVrms to 5Vrms 10mHz to 150MHz

40mVrms to 5Vrms 150MHz to 250MHz

100mVrms to 5Vrms 250MHz to 300MHz

200mVrms to 5Vrms 300MHz to 350MHz

7.8.6 Gate Time: 1ms to 100s

7.8.7 Trigger Level: -2.5V to +2.5V

7.8.8 Couple Mode: AC, DC

7.8.9 Low-pass Filter: enable or disable

7.8.9 Connector: isolated with case, limited voltage for connector housing is ±42Vpk

7.9 Communication Port

7.9.1 Interface type: USB Device, USB Host, LAN

7.9.2 Connector: connected with case grounded

7.10 Clock

7.10.1 External Clock Input

Clock Frequency: 10 MHz ±50Hz

Clock Amplitude: 100m Vpp to 5 Vpp

Input Impedance: 300 , AC coupling

Connector: isolated with case and other connectors

7.10.2 Internal Clock Output

Clock Frequency: 10 MHz