Datasheet

List Sweep:

Dwell Time: 1ms to 500s

Hold Time: 0s to 500s

7.3.4 Frequency List Length: 128

7.3.5 Trigger Source: internal, external and manual

7.4 Burst Output

7.4.1 Burst Waveform: Sine, Square, Ramp and etc.

7.4.2 Burst Mode: Triggered, Gated

7.4.3 Burst Period: 1μs to 500s

7.4.4 Burst Count: 1 to 100000000 cycles

7.4.5 Gated Output: More than two complete cycles

7.4.6 Start/Stop Phase: 0°to 360°

7.4.7 Trigger Source: internal, external or manual

7.5 Dual Channels Characteristics

7.5.1 Frequency Coupling: frequency ratio, frequency difference

7.5.2 Amplitude & Offset Coupling: amplitude difference, offset difference

7.5.3 Waveform Combine: combine amplitude: 0% to 100%

7.6 SYNC Output

7.6.1 Waveform Characteristics: TTL compatible, edge time≤10ns

7.6.2 Frequency and Pulse Width: changes as working mode

7.6.3 Output Impedance: 50Ω typical value

7.6.4 Connector Grounded: connect with the housings grounded and isolated with case,

limited voltage for connector housing is ±42Vpk.

7.7 Modulation In and Trigger In/Out

7.7.1 Modulation Input:

Input Voltage: ±2.5Vpp (full scale)

Input Impedance: 10kΩ

7.7.2 Trigger Input:

Input Level: TTL Compatible

Input Impedance: 1kΩ